Product Group:
Plastics Testing
Rubber Testing
Paper & Cardboard Testing
Packaging Testing
Auto Tensile Tester - XLW Auto
Auto Tensile Tester

Qualitest covers a complete and competitive range of Auto Tensile Testers and consumables for plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, and etc.

The Auto Tensile Tester - XLW Series offer testing for force properties with high precision (better than 0.5% of reading accuracy) with multiple test ranges. The instruments are designed with independent test modes and bidirectional test modes of stretching and compression, all meeting standard testing requirements. These units are designed for measuring tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tubes, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminum foil, diaphragm, back sheets, non-woven fabrics, rubber and paper, and much more. The supplied software provides easy to read data analysis and comparison charts.

The pre-conditioned specimen is mounted between two grips, which positions the specimen during the tests. The force and displacement changes are separately recorded by the load cell fixed on the grip and embedded displacement transducer where data is used for further calculation.

ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904 and other International Standards

Basic Applications for the Auto Tensile Tester - XLW Series

  • Shearing Test
  • Test of Tensile Strength and Elongation Rate
  • Test of Tensile Strength at Break
  • Tear Resistance Test
  • Heat Seal Strength Test
  • 90 Degree Peel Test
  • 180 Degree Peel Test

Extended Applications for the Auto Tensile Tester - XLW Series

  • Puncture Test of Hypodermic Needles in Artificial Skin
  • Puncture Test of Films
  • Puncture Test of Infusion Bags
  • Puncture/Pullout Test of Flexible Rubber Closures
  • Opening Resistance Test of Combined Covers
  • Tear Test of ZD - Type Caps
  • Opening Force Test of Oral Liquid Caps
  • Puncture/Pullout Test of Oral Liquid Caps
  • 90 Degree Pullout Test of Infusion Bag Caps
  • Pullout Test of Infusion Bag Caps
  • 23 Degree Pullout Test of Bottle Caps
  • Puncture/Pullout Test of Bottle Caps or Rubber Closures
  • 90 Degree Peel Test of Adhesive Tapes
  • Tear Resistance Test of Adhesive Binding Books
  • 90 Degree Peel Test of Water-soluble Plasters
  • Tear Resistance Test of Adhesives
  • Adhesive Strength Test (soft)
  • Adhesive Strength Test (hard)
  • Peel Test of Flexible Tube Caps
  • Removal Force of Pipes and Pipe Joints
  • Pullout Test of Cosmetic Brush Hair
  • Pullout Test of Tooth Brush Hair
  • Tensile Strength of Ropes at Break
  • Opening Force Test of Jelly Cups and Yogurt Cups
  • Peel Test of Cup Films
  • Pullout Test of Rubber Stoppers
  • 45 Degree Peel Test of Bottle Membranes
  • Tensile Strength of Sealing Bags
  • Peel Test of Magnetic Cores
  • 90 Degree Peel Test of Magnetic Cards
  • Tear Resistance of Heat Sealing Films
  • Separating Force of Protect Films
  • Peel Test of Release Paper
  • Tear Test Using Trouser Method
  • Unwrapping Force of Adhesive Tapes
  • Compressive Resistance of Plastic Bottles
  • 20 Degree Peel Test
  • 135 Degree Peel Test of Plugs
  • Peeling Grips of Floating Rollers
  • Eccentric Grips
  • Wide Sample Grips
  • Japanese Sample Grips
  • British Sample Grips

Available Models

Auto Tensile Tester - XLW Auto
Auto Tensile Tester - XLW Auto

Auto Tensile Tester - XLW Auto

The XLW Auto Tensile Tester is designed for specialty tests which include puncture test of hypodermic needles in artificial skin, puncture test of infusion bags, tear test of ZD-type caps, opening and unwrapping force, and many more.

Features of the Auto Tensile Tester - XLW Auto

  • 1% of reading value effectively ensures the accuracy of test results.
  • 7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages.
  • Different ranges of load cells and 7 distinct test speeds to meet different test requirements.
  • The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display.
  • Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation.
  • Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter set, printing, inquiry, clear and calibration, etc.
  • Support Lystem™ Lab Data Sharing System for uniform and systematic data management.
Technical Specifications for Auto Tensile Tester - XLW Auto
Item Description
Test Range 100N, 200N, 500N (one of them is available)
Accuracy 1% of reading value
Number of Specimens 1
Test speed 50, 100, 150, 200, 250, 300, 500 mm/min
Specimen width 30mm (Standard Grip)
50mm (Optional Grip)
Sample Clamp Manual
Stroke 600mm
Instrument Size 450mm(L) x 450mm(W) x 980mm(H)
Power AC 220V 50Hz
Net weight 65kg
Configuration Standard: Mainframe, Universal Grips, Professional Software, and Communication Cable
Optional: Micro Printer, Printing Cable, Standard Pressure Roller, Test Plate, Floating Roller Grip, Sample Cutter, and Customized Grips
Auto Tensile Tester - XLW (B)
Auto Tensile Tester - XLW (B)

Auto Tensile Tester - XLW (B)

The Auto Tensile Tester - XLW (B) can be used to measure the physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, and etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive, and open force and etc.

Features of the Auto Tensile Tester - XLW (B)

  • 1% of reading value effectively ensures the accuracy of test results.
  • 2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users.
  • 3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available.
  • Deformation rate could be easily obtained by the elongation and elongation rate ruler.
  • Different test range of load cells and 7 distinct test speeds to meet different test requirements.
  • The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display.
  • Intelligent designs of over-travel protection, overload protection, automatic position reset and error alert for safe test operation.
  • Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection.
  • Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter set, printing, inquiry, clear and calibration, etc.
  • Support Lystem™ Lab Data Sharing System for uniform and systematic data management.
Technical Specifications for the Auto Tensile Tester - XLW (B)
Item Description
Test Range 200N (30N, 50N or 100N is optional)
Accuracy 1% of reading value
Number of Specimens 1
Test speed 50, 100, 150, 200, 250, 300, 500 mm/min
Specimen width 30mm (Standard Grip)
50mm (Optional Grip)
Sample Clamp Manual
Stroke 600mm
Instrument Size 450 mm(L) x 580 mm(W) x 1100 mm(H)
Power AC 220V 50Hz
Net weight 61kg
Configuration Standard: Mainframe, Universal Grips, Professional Software, and Communication Cable
Optional: Micro Printer, Printing Cable, Standard Pressure Roller, Test Plate, Floating Roller Grip, Sample Cutter, and Customized Grips

 

Auto Tensile Tester - XLW (EC)
Auto Tensile Tester - XLW (EC)

Auto Tensile Tester - XLW (EC)

The Auto Tensile Tester - XLW (EC) can be used to measure tensile, peeling, deformation, tearing, and many more.

Features of the Auto Tensile Tester - XLW (EC)

  • Better than 0.5% of reading value effectively ensures accurate test results.
  • Support bidirectional testing modes including stretching and compression and test speed could be adjusted freely.
  • 8 independent test modes are available, including tensile strength, peeling force, tearing force, heat sealing and other performance test.
  • Different test range of load cells and 7 distinct test speeds to meet different test requirements.
  • Pneumatic clamping system provides the even clamping force for specimen to ensure the accuracy of test results .
  • Intelligent designs of over-travel protection, overload protect, and automatic position reset for safe test operation.
  • Professional operating software support statistical analysis of group specimens, and export test results in different units.
  • Support LystemTM Lab Data Sharing System for uniform and systematic management of test results and test reports.
  • Embedded computer control system integrates control software with the instruments together.
  • Professional control system provides safer and more reliable data management as well as test operation.
  • The instrument can be operated easily by one mouse, one keyboard, and one monitor only based on Windows operation interface.
  • 1he instrument is equipped with four USB ports and dual internet ports for convenient data transmission.
Technical Specifications for Auto Tensile Tester - XLW (EC)
Item Description
Test Range 500N (standard) 50N (optional)
Accuracy Better than 0.5% of reading value
Number of Specimens 1
Test speed Forward 50, 100, 150, 200, 250, 300, 500 mm/min
Backward 50, 100, 150, 200, 250, 300, 500 mm/min
Specimen width 30mm (Standard Grip)
50mm (Optional Grip)
Stroke 1000mm
Clampling Method Pneumatic
Gas Supply Pressure 0.5 MPa - 0.7 MPa
Stroke  
Gas Supply Pressure 0.5 MPa - 0.7 MPa
Instrument Size 450mm(L) x 450mm(W) x 1410mm(H)
Power AC 220V 50Hz
Net weight 70kg
Configuration Standard: Mainframe, Universal Grips, Professional Software, and Communication Cable
Optional: Standard Pressure Roller, Test Plate, Sample Cutter, and Customized Grips
Auto Tensile Tester - XLW (G6)
Auto Tensile Tester - XLW (G6)

Auto Tensile Tester - XLW (G6)

The Auto Tensile Tester - XLW (G6) Tensile Tester is designed primarily for tensile, tear and peel tests.

Features of the Auto Tensile Tester - XLW (G6)

  • Better than 0.5% of reading value effectively ensures accurate test results.
  • Multiple testing modes are available, including tensile strength, deformation, peeling and tearing, etc.
  • Stress at defined elongation, elastic modulus and stress and strain etc. could be analyzed.
  • 1200mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate.
  • 6 working stations and pneumatic specimen clamping facilitate to test multiple specimens simultaneously.
  • Different test range of load cells and 6 distinct test speeds to meet different test requirements.
  • The instrument is controlled by computer, with PVC operation panel and membrane switch which is convenient for instrument operation.
  • Intelligent designs of over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation.
  • Professional operating software support statistical analysis of group specimens, superposition analysis of test curves, maximum, minimum, average and standard deviation of test results.
  • Support zoom-in and zoom-out of test curve and vernier indication of test results.
  • Support Lystem™ Lab Data Sharing System for uniform and systematic management of test results and test reports.
Technical Specifications for Auto Tensile Tester - XLW (G6)
Item Description
Test Range 500N, 50N (one of them is available)
Accuracy 0.5% of reading value
Number of Specimens 1-6
Test speed 100, 150, 200, 250, 300, 500 mm/min
Specimen width 30mm (Standard Grip)
Sample Clamp Pneumatic Sample Clamp
Stroke 1200 mm
Gas Supply Pressure 0.5 MPa-0.7 MPa (Not in supply scope)
Port Size Φ6 mm PU Tubing
Instrument Size 1020 mm(L) x 510 mm(W) x 2100 mm(H)
Power AC 220V 50Hz
Net weight 210 kg
Configuration Standard: Mainframe, Universal Grips, Professional Software, Communication Cable, and Calibration Cable
Optional: Standard Pressure Roller, Test Plate, Sample Cutter, and Customized Grips
Auto Tensile Tester - XLW (M)
Auto Tensile Tester - XLW (M)

Auto Tensile Tester - XLW (M)

The Auto Tensile Tester - XLW (M) is equipped with more than 100 grips for tests of more than 1000 materials. And customization is also available for special materials tests.

Features of the Auto Tensile Tester - XLW (M)

  • 1% of reading value effectively ensures accurate test results.
  • 7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages.
  • Mount the specimen tightly with pneumatic specimen clamp to ensure the accuracy of test results.
  • Different ranges of load cells and 7 distinct test speeds to meet different test requirements.
  • The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display.
  • Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation.
  • Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection.
  • Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter set, printing, inquiry, clear and calibration, etc.
  • Support Lystem™ Lab Data Sharing System for uniform and systematic data management.
Technical Specifications for Auto Tensile Tester - XLW (M)
Item Description
Test Range 100N, 200N, 500N (one of them is available)
Accuracy 1% of reading value
Number of Specimens 1
Test speed 50, 100, 150, 200, 250, 300, 500 mm/min
Specimen width 30mm (Standard Grip)
50mm (Optional Grip)
Sample Clamp Pneumatic Sample Clamp
Stroke 600 mm
Gas Supply Pressure 0.5 MPa-0.7 MPa (Not in supply scope)
Port Size Φ4 mm PU Tubing
Instrument Size 450 mm(L) x 580 mm(W) x 1100 mm(H)
Power AC 220V 50Hz
Net weight 60 kg
Configuration Standard: Mainframe, Pneumatic Clamping System, Professional Software, and Communication Cable
Optional: Micro Printer, Printing Cable, Standard Pressure Roller, Test Plate, Sample Cutter, and Customized Grips
Auto Tensile Tester - XLW (PC)
Auto Tensile Tester - XLW (PC)

Auto Tensile Tester - XLW (PC)

The Auto Tensile Tester - XLW (PC) is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (better than 0.5% of reading value) and multiple test ranges. The instrument is designed with 7 independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions.

Features of the Auto Tensile Tester - XLW (PC)

  • Better than 0.5% of reading value effectively ensures accurate test results.
  • 7 independent test modes are available, including tensile strength, peeling force, tearing force and other force properties of flexible packages.
  • 1000mm extra-long stroke satisfies the test needs of various materials with extreme deformation rate.
  • Different test range of load cells and 7distinct test speeds to meet different test requirements.
  • The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display.
  • Intelligent designs of over-travel protection, overload protect, automatic position reset and power failure memory for safe test operation.
  • Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions.
  • Support Lystem™ Lab Data Sharing System for uniform management of test results and test reports.
Technical Specifications for Auto Tensile Tester - XLW (PC)
Item Description
Test Range 500N, 50N (one of them is available)
Accuracy <0.5% of reading value
Number of Specimens 1
Test speed 50 100 150 200 250 300 500mm/min
Specimen width 30mm (Standard Grip)
50mm (Optional Grip)
Stroke 1000mm
Instrument Size 450(L) mm x 450(B) mm x 1410(H) mm
Power AC 220V 50Hz
Net weight 68kg
Configuration Standard: Mainframe, Professional Software, LCD Monitor, Keyboard, Mouse, Universal Grips, Pneumatic Clamping System
Optional: Standard Pressure Roller, Test Plate, Sample Cutter, Customized Grips, Printer (compatible with PCL3 language)