byko-test 1200 Coating Thickness Gauge

The byko-test 1200 Coating Thickness Gaugeis an affordable and accurate gage for measuring coatings aplied to ferrous substrates, such as steel structures - the electronic banana gage.

• Used for measurements over ferrous substrates
• Simply place the instrument, push down and read
• Probe is built into the instrument - no cables or plugs
• byko-test 1200 Coating Thickness Gauge an easy-to-use model only for ferrous

The uniqe design and duplex LCD display allow for measurements to be taken in areas that other integral probe gages are unable to reach. Readings may be automaticlly converted from mils to microns.Perform a zero point calibration either with the included zero test plate or on the test substrate.

Standards byko-test 1200 Coating Thickness Gauge
ASTM	B 499,
BS	5411
DIN	50981
DIN EN ISO	2808
EN ISO	2178

Technical Specification for byko-test 1200 Coating Thickness Gauge
Substrate Fe	steel or iron
Measuring Range	0 - 80 mils (0 - 2000 µm)
Resolution	0.01 - 10 mils; 0.1 - 80 mils (0.1 - 100 µm; 1 - 1000 µm) 10 - 1000 / 2000 µm)
Traverse Speed Accuracy	± 1.5 µm + 2%
Tolerance	0.06 mils (1.5 µm)
Minimum Curvature	0.2 in (5 mm) convex 1.0 in (25 mm) konkav
Minimum Substrate Thickness	Fe: 0.2 mm (0.001 in)
Minimum Sample Diameters	10 mm
Operating Temperature	40 - 120 °F (5 - 50 °C)
Power Supply	9 volt alkaline battery
Weight	0.3 lb (0.13 kg)
Dimension	6.5 x 2.5 x 1.5 in (166 x 64 x 34 mm)
Comes complete with: byko-test 1200 Fe Calibration Certificate 1 probe protection ring 9 V alkaline battery Carrying case with zero plate Operating instructions

Certified Calibration Shims

These plastic shims aid in the calibration of thickness gages on ferrous or non-ferrous metallic substrates. Plastic shims can be used to calibrate on the actual test substrate.

For further information or to place an order for the byko-test 1200 Coating Thickness Gauge, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button