| Standards byko-test 1500 Coating Thickness Gauge | |
|---|---|
| ASTM | B 499, |
| BS | 5411 |
| DIN | 50981 |
| DIN EN ISO | 2808 |
| EN ISO | 2178 |
byko-test 1500 Coating Thickness Gauge
byko-test 1500 Coating Thickness Gauge
The byko-test 1500 Coating Thickness Gaugehas a unique design to allow measurement of a variety of products. No cable exchange or calibration is needed when changing from a ferrous to a non-ferrous substrate. The duplex display and 10 second retention of the last measured value makes the byko-test 1500 easy to work with.
• Compact pocket size instrument
• One-handed design for ease of use
• Two integrated, non-wearing ruby probe tips
• Automatic calibration
• Display switchable from mils to microns
• Special "V" grove for curved surfaces
The byko-test 1500 is available in two models:
byko-test 1500 Coating Thickness Gauge basic
The easy-to-use basic model allows a quick check and delivers accurate results.
byko-test 1500 Coating Thickness Gauge memory
The memory model offers statistics in the instrument and software for further evaluation.
• Saves up to 3900 values
• Block / batch segmentations (999)
• Statistics with averaging, std. dev. and min/max
• RS232 Interface
• Menu-guided software – must be ordered separately
| Technical Specification for byko-test 1500 Coating Thickness Gauge | |
|---|---|
| Substrate Fe | steel or iron |
| Substrate NFe | non-magnetic metals: aluminum, copper, brass, zinc, stainless steel |
| Measuring Range | 0 - 200 mils (0 - 5000 µm) |
| Traverse Speed Accuracy | ± (1µm + 2%*) from 0-39 mils (0-999 µm) ± 3.5%* from 40-200 mils (1.00-5.00 mm) |
| Minimum Curvature | 0.2 in (5 mm) convex; 1 in (25 mm) concave |
| Minimum Substrate Thickness | Fe: 0.01 in (0.2 mm); NFe: 0.002 in (0.05 mm) |
| Minimum Area of Measurement | 0.4 x 0.4 in (10 x 10 mm) |
| Operating Temperature | 32 - 140 °F (0 - 60 °C) |
| Power Supply | 9 volt alkaline battery |
| Dimensions | 6.5 x 2.5 x 1.3 in (166 x 64 x 34 mm) |
| Weight | approx. 4.6 oz (130 g) with battery |
* of measured value Comes complete with: |
|
Certified Calibration Shims
These plastic shims aid in the calibration of thickness gages on ferrous or non-ferrous metallic substrates. Plastic shims can be used to calibrate on the actual test substrate.
For further information or to place an order for the byko-test 1500 Coating Thickness Gauge, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button