Advanced Air Entrainment Meter is used to measure the air content of freshly mixed mortar in accordance with the air pressure compensation principle.
Cement Testing Equipment
The Automatic Mortar Mixer - QualiMIX series is used to make cement mortar and cement paste.
The Compression & Flexural testing product line from Qualitest offers a wide variety that will fit almost any budget. Different options between models include digital or analog display, single or dual range, and different types of configurations.
Vibration Table & Jolting Apparatus - QualiVIB is used for the fabrication of mortar specimens.
The Air Permeability Tester for Cement and Powders - Blaine Apparatus - QualiPERM is a fully automatic cement air permeability tester used for the determination of the specific surface or Blaine value.
The Vicat Needle Apparatus -QualiSet units are to determine the initial and final setting time of cement, mortar pastes and gypsum according to DIN 1164/ EN 196 / BS 4550/ ASTM C187-191 EN 480-2 / DIN 1168 / Test method B EN 12379-2 / ASTM C472-99.
Qualitest offers extensive range of advanced Cement testing equipment such as Vicat Apparatus.
Automatic Vicat Setting Time Determination testers for Cement and Mortars with one or Multiple measuring station.
The Automatic Single Station Vicat Needle apparatus, designed and manufactured using the most recent and sophisticated technology, is used for the initial and final setting time determination of cement or mortar.
The Solution Calorimeter for Cement and Concrete - QualiCAL is an instrument used to analyze the setting behaviour of building materials such as cement and mortar.
The Semi-adiabatic Langavant Calorimeter - QualiLang system has been designed to measure the heat of hydration.
The Viskomat NT is a versatile rotational viscometer for determining the workability of fine grained building materials such as cement paste, mortar, fine concrete, plaster etc.
The Viskomat XL is a versatile rotational viscometer for determining the workability of building materials such as mortar, cement and fresh concrete (up to 8mm grain size).
The Shrinkage cone is designed with a double wall metal vessel for easy heating and cooling using an external liquid temperature control unit.
Thin Layer Shrinkage System – This set-up allows to investigate the different formulation parameters and their influences onto the different stages of shrinkage and expansion, namely the plastic shrinkage, setting expansion and drying shrinkage.
The Bending Drain measures the shrinkage and bending of building materials during the setting and hardening process. The Bending Drain can also be used in simulating how the building material reacts to built in features such as real world electrical floor heating.
Curacem curing cabinet is ideally used in commercial and on site laboratories for the standard curing of samples of concrete, cement and similar material.
The early setting is usual measured with the penetrometers or the Vicat apparatus. This kind of measurement has some disadvantages.
Autoclave from Qualitest is a pressure device with unique safety standards and TUV approval. The autoclave is a vital instrument to measure the expansion of cement when the materials are hydrated.
The Cube Steel Moulds - Cement Mortar prepares concrete cube samples from 100 to 300mm size.
The Shrinkage Drain system is one of several instruments that Qualitest offers to measure the volume change during the setting and hardening of Concrete and other Building material.
Kleine Apparatus is designed for the determination of the carbon dioxide in lime.
Flow test apparatus is designed for determining the consistency of the expansion pre-mixed cement mortars.
Circulating Water Bath, fit with cooler unit and recirculating water system, is used to condition in water asphalt specimens for Marshall and Indirect tensile test.