Triaxial System - Dynatriax System for Soil Analysis
 
Triaxial System - Dynatriax System for Soil Analysis

Triaxial System - Dynatriax System for Soil Analysis

Download Triaxial System - Dynatriax System for Soil Analysis PDF Download Triaxial System - Dynatriax System for Soil Analysis PDF

The Triaxial System - Dynatriax System for Soil Analysis system reproduces vibration, shock and cyclic forces applied to the soil samples in the laboratory such that the engineers have a better understanding of how a soil behaves in these conditions. It is a Servo Pneumatic system designed to perform static and cyclic stages of a Triaxial test.

Base system includes a triaxial load frame 50kN (11000lbf) or 100kN (22000lbf) capacity, fitted with a double acting pneumatic actuator ±5 kN (1100lbf) or ±14 kN (3000lbf) which can generate frequencies of up to 70 Hz; data acquisition, process and control system; control Software for saturation, consolidation, stress path, monotonic and cyclic shear stages; personal desktop computer

The Triaxial System - Dynatriax System for Soil Analysis is the only pneumatic system which covers most requirements with three axis control for axial load or displacement, cell pressure and back pressure, user defined wave shapes, Automatic performance of 24 hours 7 days test to maximize the efficiency of the equipment, etc. and meets  ASTM D 5311; ASTM D 3999; and other international standards.

The dynamic triaxial system developed using the latest technologies and decades of experience in the dynamic soil testing field, is ideal for commercial and research laboratories.

Flexibility
  • Three axis closed loop control for axial load or displacement, cell and back pressure
  • Operating frequency up to 10 Hz
  • Two dynamic load/displacement options:
    • Up to ±15 mm (±5 kN actuator)
    • Up to ±25 mm (±14 kN actuator)
  • Two load frame options: 50 and 100 kN (11000 and 22000 lbf)
  • Capability to perform static (effective stress and stress path), dynamic and unsaturated soil triaxial tests
  • Available upgrade for bender element testing, local strain and mid height pore pressure measurement
Reliability
  • Standard and user defined wave shapes also derived form in situ measurements (from violent earthquake to sedate ocean waves)
  • Complete test automation of all test stages using an high sensitivity closed loop P.I.D. feedback(up to 10 kHz)
  • Automatic compensation of cell/back pressure during dynamic stage
  • Transducers calibration and verification management by the software
  • Manual and automatic emergency air shut off function
Dynatriax Software
Modularity
  • Test setup by unique programmable multi-stage test procedure: during the test run, access to all controls to expand and modify the stages according to the response of the soil specimen
  • Designed to easily integrate existing static systems

The Triaxial System - Dynatriax System for Soil Analysis is a computer controlled servo-pneumatic system designed to perform the static and dynamic stages of a triaxial test. The system manages three closed loop axis:

  1. Vertical load/displacement
    •  up to ± 15 mm (± 5 kN actuator)
    •  up to ± 25 mm (± 14 kN actuator)
  1. Cell pressure up to 1000 kPa
  2. Back pressure up to 1000 kPa

The Basic system includes: Tritech 50 or Tritech 100 load machines, Actuator and the Data Acquisition, process & control system; Software

For further information or to place an order for the Triaxial System - Dynatriax System for Soil Analysis CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button