Full Notch Creep Tester
FNCT (Full Notch Creep Tester) is used to determine the stress cracking resistance of polyethylene materials in any environment. A test specimen in the form of a square-section bar with coplanar notches in each face at the center, is subjected to a static tensile load in a temperature-controlled environment, for example air, water, surfactant solution. The geometry of the specimen is such that plane strain conditions are obtained and brittle failure occurs under appropriate tensile load and temperature conditions. The time for this brittle failure to occur after loading is recorded.
Characteristics
- Each station could be run separately;
- Load automatically;
- Ease of use;
- High accuracy and stability
- Supporting each station separately without any interference.
- Diagnosis automatically with protective function
| Technical specifications for Full Notch Creep Tester | |
|---|---|
| Test method | Full Notch creep test—ISO 16770 |
| Test of resistance to pull out of joins between polyethylene pressure pipes and fittings | ISO3501 |
| Test environment | Constant temperature chamber or heating oven |
| Technical Parameters | |
| Specimen | 100mm x 10mm x 10mm 100mm x 10mm x 4 mm 90mm x 6mm x 6mm |
| Static Load | 1000N, 2000N ,5000N (You can choose one load cell) |
| Test Stations | 6 |
| Creep Journey | 200mm |
| Displacement resolution | 0.027mm |
| Temperature controlling scope | 50 °C ~ 95°C |
| Overall dimensions | |
| Apparaturs (L x D x H) | 1900mm x 1100mm x 2000mm |
| Constant temperature chamber | 1330mm D x 240mm W x 410mm H |
| Net Weight | 800kg |
| Gross weight | 1000kg |
| Electrical power supply | |
| Voltage | 380V, 50Hz, Three phase five wire |
| Total installed power | 12kW |
For further information or to place an order for the Full Notch Creep Tester, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button