Gel Timer

These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or elastomer. As gelation occurs, drag exeeds torque and the motor stalls. This signals an electronic circuit which stops the clock and activates a flashing lamp. The gel time will show on the LCD display.

• Simple to operate – place the material sample in the cup, insert the wire stirrer, set the counter to 0 and switch on the unit
• No mess – No tools required – No cleanup • Motor can remain stalled overnight without damaging the unit
• Choose from three different models:
  1. Basic Version
  2. “Hot Pot” model determines gel time at temperatures up to 350 °F with a simple rheostat temperature controller
  3. “StablTemp Hot Pot” model determines gel time at temperatures up to 350 °F with an electronic proportioning control which regulates the set temperature with virtually no drift or variation.

Accessories Gel Timer
Cat. No.	Description
PM-1810	Paper Clip Liners for Standard Gel Timer (pk of 50)
PM-1807	Wire Stirrers (pk of 100)
PM-1809	Aluminum Cup Liners for Hot Pots only (pk of 100)

Technical Specification for Gel Timer
Cat No.	Description	Weight	Oerating temprature	Thermometers
PM-1800	Standard Gel Timer, 120VAC/60Hz	4 lbs (2.2 kg)	Room Temperature
PM-1801	Standard Gel Timer, 220VAC/50Hz	4 lbs (2.2 kg)	Room Temperature
PM-1802	'Hot Pot' Gel Timer, 120VAC/60Hz	4 lbs (2.2 kg)	150 - 350 °F = 5 % of setting	Bimetal stem-type
PM-1803	'Hot Pot' Gel Timer, 220VAC/50Hz	4 lbs (2.2 kg)	150 - 350 °F = 5 % of setting	Bimetal stem-type
PM-1804	'StablTemp Hot Pot' Gel Timer, 120VAC/60Hz	4 lbs (2.2 kg)	140 - 350 °F = 1 % of setting	Bimetal stem-type
PM-1805	'StablTemp Hot Pot' Gel Timer, 220VAC/50Hz	4 lbs (2.2 kg)	140 - 350 °F = 1 % of setting	Bimetal stem-type
Comes complete with: Gel timer 10 Stirrers Operating instuctions		Maximum Recording Time	9,999 minutes, 59 seconds (167 hrs)
		Minimum Recording Time	1 second
		Stir Speed	20 rpm, = 2 % accuracy
		Dimension	7.5 x 9.0 x 5.5 in (191 x 227 x 140 mm)

For further information or to place an order for the Gel Timer, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button