Hydraulic Universal Testing Machines - HW Series

Hydraulic Universal Testing Machines - HW Series

Parent Product
Universal Testing Machine - Tensile Tester
Test Property
Tensile Testing
Compression Testing
Bend Testing
Shear Testing
Testing Bundle Deal
UTM 1000 kN Plus Bundle
Standards
ASTM A416
ASTM E8
ASTM C39

Universal Testing Machine - QT-HW2 Series

Rigid 4-column load frame construction providing superior axial and lateral stiffness and minimum maintenance, low reaction at specimen failure. Chrome plated columns for easy cleaning and longer life.

Extra-length screws and columns, with an adjustable lower crosshead, to increase the available test space for longer test specimens. Double acting crossbeam quickly accommodates specimens of varying lengths. In the case of the additional length of columns, the maximum testing space is adjustable to meet extra length specimens.

Fully open front hydraulic wedge grips make it easy to insert and remove specimens for increased productivity and operator safety.  Interchangeable design allows a limited number of jaw faces to accommodate a large range of specimen sizes. Fully open front wedge clamps for easier loading and allowing rapid loading and unloading of specimens. Including grip control system mounted directly at the machine Tooling for tension, compression, bend/flex, shear, and other tests available. With digital displacement transducer for the best positioning and measuring accuracy.

Applications

The UTM is used to evaluate the tensile, compression, bend, and shear properties of materials including and metallic materials.

Qualitest’s High Strength Frame Dual Space Servo Hydraulic Universal Testing Machine series is used to verify various mechanical properties of:

  • Metal: Pipe, tube, wire, rod, strip, plate and strip
  • Fasteners: Tensile, proof, single and double shear
  • Construction materials: Rebar, wire strand, mesh, folding, compression of concrete and components

Control Software is used to control the Universal testing machine. The Tester and the software are designed to accommodate a wide variety of testing needs. The software has a variety of pre-set programmed test cycles for compression, tensile and cyclical testing to meet a variety of testing standards.

A powerful Help wizard helps the operator to set up and connect the accessories in many phases.  Includes installed packages of various test methods according to major national and international reference standards and different types of material to perform the following tests:

  • Traction          
  • Compression
  • Flexure
  • Cycles
  • Spring tests
  • Customize your own tests

This program is complete with a graphic interface for

The structure of the software is very flexible giving the possibility to personalize the tests, process the results and certificates, and in particular, it is possible to
  • Selection of communication language
  • The setting of test methods
  • Test execution
  • Analysis of the results
  • Printing of the certificates
  • Graphic post-analysis of the tests
  • Statistical analysis of the tests
  • Create custom tests
  • Customize the certificate
  • A print certificate with Company logo
  • Print certificates anytime in future, as a single test as well as summarizing certificate
  • Analyze a test anytime in the future.
Theory/Method

Reference Standards

Metal

Tensile tests at ambient temperature

Compression tests at ambient temperature

Shear Tests

Strand tensile tests

ASTM E8M–09

AS 1391

ISO 15630-2

ASTM C39

EN12390-3

ASTM E 143

ASTM A 416

ASTM A370-07b

ASTM A 706/A,

706M - 6a

ASTMC469

DIN1048

ASTM 496

ASTM A185, A185M-07

ASTM A48M-03

EN 10002-1

ISO 4506

UNI6556

BS 5896

ASTM A615, A615M-09

HB 5143

EN 10080

ISO6784

 

 

ASTM A82, A82M – 07

ISO 15630-1

JIS Z 2241

 

Metals and Construction Material

Bend Tests

ASTM A185/A185M – 07

API 5L

ISO 7438

ASTM E190

AWS B4.0

 

Welded Fabric

Shear Tests

ASTM E8M – 09

ASTM A82/ A82M

ISO 15630-2

HB 5143

ASTM A370-07b

ASTM A 706/A

ISO 6394

JIS Z 2241

ASTM A185/ A185M

AS 1391 706M - 06a

BS 18

 

ASTM A615/A615M-09

ASTM A48M-03

EN 10002-1

ASTM A82/ A82M – 07

ISO 15630-1

EN 10080– 07

Fasteners

Tensile tests for bolt

Nut load keeping tests

ASTM F606-07

ISO 898-1

ASTM E290 – 09

ISO 7438

ISO 15630-2

JIS Z 2248

AS 4291.1

 

ASTM A370-07b

ISO 15630-1

ISO 10065

 

Cement, Concrete and Rock

Flexural tests for cement

Compression tests for cement

Flexural tests for concrete

ASTM C348

ASTM C349 -08

ASTM C 78 – 07

ASTM C1609 /, C1609M

ASTM C109, C109M – 08

ISO 1920-4

ISO 679

ISO 679

 

BS EN 196-1

BS EN 196-1
Technical Specifications

Model

QT-HW2-600

QT-HW2-600-EXT

Capacity

600kN

Load Resolution

Capacity/300, 000 (fully auto scaling of single measurement range)

Stroke

250 mm

Testing Speeds

0.1~70 mm/mi

Adjustable Crosshead Speed

350 mm/mi

Diameter of Round Specimens for Tensile Test

ᴓ6 ~ ᴓ 16 mm, ᴓ 13 ~ ᴓ 27 mm, ᴓ27 ~ ᴓ 40 mm

Thickness of Flat Specimens for Tensile Test

0 – 30 mm

Width of Flat Specimens for Tensile Test

<90mm

Compression Platen Dimensions

ᴓ 178mm

Load Measurement Accuracy

±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721

Strain Measurement Accuracy

±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.

Speed Accuracy

Set speed＜10% Max. Speed: ±1%    Set speed ≥10% Max. speed:±0.5%

Position Measurement Accuracy

±0.5 of reading or 0.001 mm, whichever is greater

Power Supply

3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s

Operating Temperature

0 to +38°C (+32 to +100°F)

Humidity Range

10% to 90% non-condensing

Storage Temperature

-40 to +66°C (-40 to +150°F)

Machine Dimensions

Clearance Between

Grips (H1) Piston Inside

750 mm

900 mm

Clearance Between Platens   (H2) Piston Inside

750 mm

900 mm

Clearance Between columns  (W)

500mm

500mm

Dimensions WXDXH

*Adjusted based on configuration

950x600x2320

950x600x2500

Weight

*Adjusted based on configuration

2575kg

2600kg

 

Model

QT-HW2-1000

QT-HW2-1000-EXT

Capacity

1,000kN

Load Resolution

Capacity/300, 000 (fully auto scaling of single measurement range)

Stroke

250 mm

Testing Speeds

0.1~70 mm/mi

Adjustable Crosshead Speed

350 mm/mi

Diameter of Round Specimens for Tensile Test

ᴓ6 ~ ᴓ 20 mm, ᴓ 20 ~ ᴓ 40 mm, ᴓ 40 ~ ᴓ 60 mm

Thickness of Flat Specimens for Tensile Test

2 – 40 mm, 30 – 60 mm

Width of Flat Specimens for Tensile Test

<110mm

Compression Platen Dimensions

ᴓ 220mm

Load Measurement Accuracy

±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721

Strain Measurement Accuracy

±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.

Speed Accuracy

Set speed＜10% Max. Speed: ±1%    Set speed ≥10% Max. speed:±0.5%

Position Measurement Accuracy

±0.5 of reading or 0.001 mm, whichever is greater

Power Supply

3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s

Operating Temperature

0 to +38°C (+32 to +100°F)

Humidity Range

10% to 90% non-condensing

Storage Temperature

-40 to +66°C (-40 to +150°F)

Machine Dimensions

Clearance Between

Grips (H1) Piston Inside

810 mm

900mm

Clearance Between Platens   (H2) Piston Inside

810 mm

900mm

Clearance Between columns  (W)

575mm

575mm

Dimensions WXDXH

*Adjusted based on configuration

1030x650x2500 mm

1030x650x2600 mm

Weight

*Adjusted based on configuration

3425 kg

3450kg

 

Model

QT-HW2-2000

QT-HW2-2000-EXT

Capacity

2,000kN

Load Resolution

Capacity/300, 000 (fully auto scaling of single measurement range)

Stroke

250 mm

Testing Speeds

0.1~70 mm/mi

Adjustable Crosshead Speed

330 mm/mi

Diameter of Round Specimens for Tensile Test

ᴓ5 ~ ᴓ 16 mm, ᴓ 15 ~ ᴓ 45 mm, ᴓ 40 ~ ᴓ 70 mm

Thickness of Flat Specimens for Tensile Test

0 – 40 mm, 30 – 70 mm

Width of Flat Specimens for Tensile Test

<150mm

Compression Platen Dimensions

330x330mm

Load Measurement Accuracy

±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721

Strain Measurement Accuracy

±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.

Speed Accuracy

Set speed＜10% Max. Speed: ±1%    Set speed ≥10% Max. speed:±0.5%

Position Measurement Accuracy

±0.5 of reading or 0.001 mm, whichever is greater

Power Supply

3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s

Operating Temperature

0 to +38°C (+32 to +100°F)

Humidity Range

10% to 90% non-condensing

Storage Temperature

-40 to +66°C (-40 to +150°F)

Machine Dimensions

Clearance Between

Grips (H1) Piston Inside

760 mm

890mm

Clearance Between Platens   (H2) Piston Inside

760 mm

890mm

Clearance Between columns  (W)

575mm

575mm

Dimensions WXDXH

*Adjusted based on configuration

1300x900x2920 mm

1300x900x3050 mm

Weight

*Adjusted based on configuration

7825 kg

7875kg

 

Model

QT-HW2-3000

Capacity

3,000kN

Load Resolution

Capacity/300, 000 (fully auto scaling of single measurement range)

Stroke

250 mm

Testing Speeds

0.1~70 mm/mi

Adjustable Crosshead Speed

260 mm/mi

Diameter of Round Specimens for Tensile Test

ᴓ20 ~ ᴓ 50 mm, ᴓ 50 ~ ᴓ 80 mm, ᴓ 80 ~ ᴓ 100 mm

Thickness of Flat Specimens for Tensile Test

 0– 50 mm, 50 – 100 mm

Width of Flat Specimens for Tensile Test

<180mm

Compression Platen Dimensions

ᴓ 280mm

Load Measurement Accuracy

±0.5% of reading to 1/50 of load weighing system capacity meets or exceeds the requirements of the following standards: ISO 7500-1, EN 10002-2, ASTM E4, JIS B7721

Strain Measurement Accuracy

±0.5% of reading to 1/50 of full scale with most ASTM E83 class B or ISO 9513 class 0.5 extensometers meets or exceeds ASTM E83, ISO 9513, and EN 10002-4.

Speed Accuracy

Set speed＜10% Max. Speed: ±1%    Set speed ≥10% Max. speed:±0.5%

Position Measurement Accuracy

±0.5 of reading or 0.001 mm, whichever is greater

Power Supply

3-Phase 380V/480V, 50/60 Hz, Power must be free of spikes and surges exceeding 10% of the nominal voltage.s

Operating Temperature

0 to +38°C (+32 to +100°F)

Humidity Range

10% to 90% non-condensing

Storage Temperature

-40 to +66°C (-40 to +150°F)

Machine Dimensions

Clearance Between

Grips (H1) Piston Inside

900 mm

Clearance Between Platens   (H2) Piston Inside

900 mm

Clearance Between columns  (W)

575mm

Dimensions WXDXH

*Adjusted based on configuration

1390x990x4950 mm

Weight

*Adjusted based on configuration

18000 kg
Hydraulic Universal Testing Machines - HW Series

Bundle Deal

UTM 1000 kN Plus Bundle -

UTM + FTIR/XRF + Chamber + Hardness Tester