James Bond Tester - Pull off Adhesion Tester
BS-1881-207, ASTM: C-4541 and ACI:503-30
The James Bond Tester - Pull off Adhesion Tester measures the adhesion of coatings to concrete and metals.
The James Bond Tester - Pull off Adhesion Tester measures the pull force used to pull a 2” or 3” disc away from the material being tested. This pressure is displayed on a precision gauge and can be related directly to the strength of the adhesion to the surface being tested.
The James Bond Tester - Pull off Adhesion Tester has been successfully used to verify the quality of existing materials, determine the adhesion strength of shotcrete, epoxies and other repair materials.
Features of the James Bond Tester - Pull off Adhesion Tester
- Accurate bond strength of repair mortars, epoxy resin, laminates, overlays, and other coatings.
- Calibrated gauge with maximum load indicator.
- Viscose damping mechanism to protect against sudden load release.
- Adjustable alignment plate with built in levelling facility.
- Compact design.
- Easy to use.
- Conforms to BS-1881-207, ASTM: C-4541 and ACI:503-30.
|BondTesterKit||JAMES BOND TESTER|
Scope of Supply: Hand operated puller, 0 - 25kN calibrated gauge with maximum load indicator and viscose damping mechanism to protect against sudden load release, Adjustable alignment plate with built-in levelling facility, Pull bolt with coupling, 10pcs three inch (75mm) diameter steel discs, 0.8in. (20mm) thick, 10pcs two inch (50mm) diameter steel discs, 0.8in. (20mm) thick, Padded steel carrying case.
|BK-25||Two Inch (50 mm) Dia Steel Discs (1 unit)|
|BK-26||Three Inch (75 mm) Dia. Steel Discs (1 unit)|
Optional accessories and spares:
|BK-13||Oil Replenish Bottle|
|Devcon 5 min 2 Ton Epoxy|