Melt Flow Tester - MFI Melt Flow Indexer



MFI Melt Flow Indexer - Quali-Fi 6000
MFI Melt Flow Indexer - Quali-Fi 6000

Melt Flow Tester - MFI Melt Flow Indexer

Download MFI PDF Download Melt Flow Indexer MFI PDF

Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000

The Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000 can be used for testing MFR and MVR of polycarbonate, fluoroplastics, as well as polyethylene, polypropylene, ABS, POM, etc and is related to the melted material viscosity. It enables the operator to estimate the mean molecular weight and at the same time gives an indication of melt flow ability through the die.

Both Melt flow rate and Melt volume rate can be determined with Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000through a calibrated die under the effect of a pre determined force, at constant temperature and for the total time of 10 minutes. The instrument is equipped with special features like movable oven for easy cleaning and inspection; Automatic application of selected load; Piston displacement monitored by encoder; Software for result acquisition, storing and exporting whenever necessary.

The Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000 has built in weights with selectable weights through the interactive screen. In case of multi weight testing the choice can be for incremental or decremental testing. No manual weight handling is required.

The Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000 has a wide color touch screen for simple and fast input, visualization of test execution, and for seeing the final results. The unit can be connected to a PC through a RS232 port for direct acquisition of the test parameters and test results which can be saved or exported.

Features of Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000:
  • Advanced microprocessor controlled design
  • Excellent Price/Quality Ratio
  • Performance to international standards
  • Self-diagnostics capability
  • Comprehensive statistical analysis package
  • Simple push-button RTD calibration
  • Smart keys for easy programming
  • Made in USA
Technical Specifications for Melt Flow Tester - MFI Melt Flow Indexer - Quali-Fi 6000
Temperature Control Range 120°C - 450°C (248°F -842°F)
Temperature Accuracy +/- 0.5°C
Temperature rising time < 30min
Temperature fluctuation ± 0.5°C
Temperature display error ≤±0.2°C
Temperature Recovery time < 4min
Accuracy of timer 0.1 s
Measurement range 1.0g -100g/10 Min (MFR) and 0.01 -350cm3/10min(MVR)
Electrical Requirement 110V/60 Hz, or 220V/50 Hz (Please specify with your order)
Dimensions 690x630x1500mm
Weight 180 kg / 396lb (approx)
LMI-5000 series MFI Melt Flow Indexer
Melt Flow Tester - MFI Melt Flow Indexer - LMI-5000 series
Best Seller

The LMFI-5000 series melt flow indexers are designed to meet or exceed the ASTM D1238 specifications as well as international standards. They provide an accurate, cost- effective means of monitoring material flow characteristics consistency.

Features of Melt Flow Tester - MFI Melt Flow Indexer - LMI5000 Series:
  • Weight Management System: LMFI-5000 has all weights stored in the unit itself, and changing the weight load is as simple as moving a pin from one slot to the next.
  • Advanced Touch-Screen Display: The larger, backlit touch-screen allows for easier programming and viewing of testing status and results.
  • Digital Encoder: A Digital encoder provides an accurate measurement of piston displacement during Method B tests. By detecting the speed of encoder movement, the LMFI-5000 can automatically determine flag length.
  • USB connectivity: With 3 USB ports (1 master, 2 slaves) users can connect to the devices for networking, printing, weigh scale measurements and data storage capability.
  • Lava Software: The LMFI-5000 delivers a wider range of data in digital form that includes melt index values, shear stress, shear rate, viscosity apparent melt density, as well as testing conditions. Optional software makes it possible to record these values and present them in various reports.
  • Easy Force Packing: Force packer delivers a constant force regardless of the size or strength of the operator, to avoid inconsistent packing of resin samples, which can cause data inconsistency.
  • Multilevel password protection
  • Weight Lift System: The pneumatic lift is capable of raising and lowering up to 31.6 kg weights. It requires 70 psi, clean and dry compressed air. Lift offers a mid stop and hold feature for high viscous materials. By storing all of the weights in a stack above the LMI, selecting the weight load is as simple as moving the selector pin from one slot to the next eliminating the need for lifting weights manually. The lift system also offers a mid-position stop and hold feature for highly viscous materials. Qualitest STRONGLY RECOMMENDS the addition and use of the PNEUMATIC LIFT OPTION for weights over 9.9 kg.


Melt Flow Tester - MFI Melt Flow Indexer - 2000 Series

ASTM D1238, ISO1133 and GB/T 3682

Melt Flow Tester - MFI Melt Flow Indexer - MFI-2000 Series are affordable bench top instruments that measure the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of a wide range of thermoplastic raw materials (granulate). The tester conforms to all National and International Melt Flow Resistance standards, including ISO1133, ASTM D1238 and GB/T 3682. Any temperature within 120°C - 450°C(248°F-842°F) can be accurately controlled.

Specifications for the Melt Flow Tester - MFI Melt Flow Indexer:
  • Temperature Control Range: 120°C - 450°C (248°F-842°F)
  • Temperature Accuracy: +/- 0.5°C
  • Electrical Requirement: 110V/60 Hz, or 220V/50 Hz (Please specify with your order)
  • Net weight: 27 kg
  • Dimensions (D x W x H): (40cm x 26cm x 62cm or 15.7in x 10.2in x 24.4in)
Melt Flow Indexer – Model   2000A
MFI-2000A
Melt Flow Indexer – Model 2000AB
MFI-2000AB
Melt Flow Tester - MFI Melt Flow Indexer - MFI-2000
Part No.
Description
MFI-2000A Melt Flow Tester - MFI Melt Flow Indexer – Model 2000A

ISO 1133, ASTM D1238 Method A and GB/T 3682 Method A Standard configuration includes: (1) 600g, (1) 875g, (1) 960g, (1) 1000g, (1) 1200g, (1) 1640g, (8) 2000g weights; Die, Die Cleaning Tool, Cut-off Knife, Cleaning Tool, Charging Tool, Lever Meter, Guide Brushing, Filling Funnel, Cylinder, Spanner
MFI-2000AB Melt Flow Indexer – Model 2000AB

ISO 1133, ASTM D1238 Methods A and B, and GB/T 3682 Standard configuration includes: (1) 600g, (1) 875g, (1) 960g, (1) 1000g, (1) 1200g, (1) 1640g, (8) 2000g, (1) 30g weights; Die, Die Cleaning Tool, Cut-off Knife, Cleaning Tool, Charging Tool, Lever Meter, Guide Brushing, Filling Funnel, Cylinder, Spanner Includes integrated micro-printer to allow printing of test results


Melt Flow Tester - MFI Melt Flow Indexer - 3000 Series

ASTM D1238, ISO1133 and GB/T 3682

MFI-3000 Series Melt Flow Indexers, with integrated touch panel display measure the melt mass-flow rate (MFR), melt volume-flow rate (MVR), as well as Melt density test according to the standards ASTM D1238 (A & B Methods), ISO 1133 and GB/T 3682.

Specifications for the Melt Flow Tester - MFI Melt Flow Indexer - 3000 Series:
  • Temperature Control Range: 120°C - 450°C (248°F-842°F)
  • Temperature Accuracy: +/- 0.5°C
  • Electrical Requirement: 110V/60 Hz, or 220V/50 Hz (Please specify with your order)
Melt Flow Indexer – Model 3000
MFI-3000
Melt Flow Tester - MFI Melt Flow Indexer - MFI-3000
Part No.
Description
MFI-3000 Melt Flow Tester - MFI Melt Flow Indexer - Model 3000

ISO 1133, ASTM D1238 Methods A and B, and GB/T 3682 Standard configuration includes: (1) 600g, (1) 875g, (1) 960g, (1) 1000g, (1) 1200g, (1) 1640g, (8) 2000g, (1) 30g weights; Die, Die Cleaning Tool, Cut-off Knife, Cleaning Tool, Charging Tool, Lever Meter, Guide Brushing, Filling Funnel, Cylinder, Spanner Includes integrated micro-printer to allow printing of test results

For further information or to place an order for the Melt Flow Tester - MFI Melt Flow Indexer, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button