Precision Abrasive Cutter - Micracut - Metallography Cut-off Saw
 

Precision Abrasive Cutter - Micracut - Metallography Cut-off Saw

Download Precision Abrasive Cutter - Micracut PDF Download Precision Abrasive Cutter - Micracut PDF

Precision Abrasive Cutter - MICRACUT family of precision cutters are available in 2 versions.
MICRACUT 151 - Micracut Precision Cutting Instrument

Precision Abrasive Cutter - MICRACUT 151

The Precision Abrasive Cutter - MICRACUT 151 accommodates diamond and abrasive wheels up to 150 mm (6”) diameter and the speed range is between 0 and 1000 rpm. The gravity feed loading design minimizes sample deformation. The sliding weight arm with counterweight allows precise force application. The digital micrometer enables the operator to set the cutting width with a resolution of 1 micron. The digital micrometer is interchangeable and the customer can mount other types of micrometers if and whenever required. The coolant tray is removable from the front of the instrument for easy cleaning. The Precision Abrasive Cutter - MICRACUT 151’s cutting chamber is fully enclosed by a transparent hood. Blade dresser is optionally available. At the end of the cut, an audible signal notifies the operator. Optional Cutting Table Attachment is available for manual cutting of extra flat large specimens and PCB’s.

MICRACUT 201 - Micracut Precision Cutting Instrument

Precision Abrasive Cutter - MICRACUT 201

The Precision Abrasive Cutter - MICRACUT 201 is built on precisely manufactured heavy duty aluminum frame providing stable and vibration resistant base for precision components and linear bearings. The cutting compartment is fully enclosed. The transparent hood is equipped with interlocking safety switch. Powerful cutting motor has variable cut-off wheel speeds from 500 up to 5000 rpm allowing both high speed and low speed cutting. By moving the cutting table, MICRACUT 201 can cut larger and deeper samples. Wide range of clamping tools can be used on the T-slotted moving table. Optional X - axis table with motorized drive mechanism positions the specimen with 5 microns positioning accuracy. Optional Vacuum sample holder provides precision grinding on the Precision Abrasive Cutter - MICRACUT 201 with pre-defined amount of material removal can be carried out by using diamond cup wheel. Optional stand can accommodate all MICRACUT specimen vices with dovetail plates. The height of the cut-off wheel (Z-axis) can be adjusted up to 45 mm. Diamond, CBN and abrasive cut-off wheels up to 200 mm diameter can be used. By height adjustment (Z-axis), the wheel wear is easily compensated. Different flange sets are available which can be selected according to the requirement of maximum cutting capacity or max. wheel support. Various clamping tools and accessories are available for different specimen geometry and applications.

For further information or to place an order for the Precision Abrasive Cutter - Micracut - Metallography Cut-off Saw, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button