Microgauge 1100
Off-Line Thickness Gauge for Film & Paper
Economical, Accurate, Easy-to-Operate... the model 1100 MicroGauge Film Thickness Gauge utilizes an LVDT contact sensor, and proven "Isolated C Frame" and resolves to ten millionths of an inch with accuracy to 50 microinches. "True Cam" for accurate descent rates, and one-button "zeroing" are standard. Equipped with an RS-232 port for a serial printer or computer. Manufactured to meet TAPPI specifications for paper or ASTM specifications for film. Range: 40 mils (0.04 inch), available to 0.50 inch.
Press one button to "zero" the digital display. Press one button to perform digital calibration. Equipped with an RS-232 port to drive a serial printer or collect data with a computer. Also equipped with a detachable foot switch.
Requires no special training to operate. The model 100-A Film Thickness Gauge is equally at home in a quality control lab or out on the production floor. Manufactured to meet TAPPI specifications for paper or ASTM specifications for film. Other configurations for measurement foot and pressure are available.
If it's Rolled, Blown, Extruded or Corrugated, depend on the Model 1100 Film Thickness Gauge for accurate caliper.
Technical Data |
|
|---|---|
| Front Panel Control - Function Switch | |
| UP | Parks the head assembly at the top of the stroke. |
| CYCLE | The head cycles continously, taking readings. |
| Down | Parks the head at the bottom of the stroke and continously updates the displayed caliper. |
| Front Panel Control - Digital Display | |
| ZERO | Sets the display values to all zeros. |
| CAL | Activates the digital calibration sequence. |
| Rear Panel Control | |
| ON/OFF | Switch and the safety fuse are located in one modular assembly. |
| FOOT SWITCH RECEPTACLE | for the optional foot switch. Allows the operator to use both hands to move samples in and out of the caliper. |
| RS-232 SERIAL PORT (DB25-F connector) |
used to drive a serial printer or to collect data with a computer. |
Microgage 1100 |
||
|---|---|---|
| Paper | Film | |
| Accuracy | ±50 micro inches | ±50 micro inches |
| Parallelism | ±50 micro inches | ±50 micro inches |
| Range | 0.04" | 0.04" |
| Dwell (at zero reading) | 3 ± 1 seconds | N/A |
| Cycle Rate (per min @ 60Hz) | 12 or 20 | up to 60 |
| Foot Size | 0.628" dia | 0.19" dia |
| Foot Pressure | 7.3 lbs/in² | 4.0 - 8.0 lbs/in² |
| Temp. Range | 50 - 110°F | 50 - 110°F |
| Weight in Use | 20 lbs | 18 lbs |
| Ship Weight | 25 lbs | 23 lbs |
| Dimensions | 10"x11"x10" | 10"x11"x10" |
| Power | 115V | 115V |
Options |
|---|
| 2" serial printer. Preints a hard copy of all readings. |
| Measurement range available to .500" |
| Configured to display metric readings. |
| Configured to European ISO measurement requirements. |
| Adjustable dwell time from less than 2 seconds to more than 20 seconds. |
| Variable "dead weight" for crush testing. |
| Measurement foot diameters available from .125" dia. to 2.20" dia. |
| 32 Bit Windows® 95/98/NT compatible software for archiving data. |
For further information or to place an order for the Microgauge 1100, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button