Mikrotron Resonant Fatigue Testing Machine - Low-Load Fatigue Tester
 
Mikrotron Resonant Fatigue Testing Machine - Low-Load  Fatigue Testers

Mikrotron Resonant Fatigue Testing Machine - Low-Load Fatigue Tester

Download Mikrotron Resonant Fatigue Testing Machine PDF Download Mikrotron Resonant Fatigue Testing Machine PDF

Compact version, for low load range 5-20 kN

Simple & successful machine concept, also in horizontal construction, e.g. for testing under corrosive conditions

Fatigue testing machine for low loads with electromagnetic resonance drive

Resonant fatigue testing machines can stress specimens or structures with a dynamic load superimposed to a static load.

The dynamic load is generated by an oscillating system (resonator) which runs in its natural frequency. The oscillating system consists of masses and springs whereas the structure or the specimen which has to be tested is also part of.

The Resonant Fatigue Testing Machines get used to full resonance, i.e. the operating point is situated on the top of the resonance curve. The resonator is excited by an electromagnetic system.

Taking advantage of the resonant effect, the power consumption is very low (typical 20 to 500 Watts), with the operating frequency in the range of 50 to 300 cpm.

In combination with our Control and evaluation system and software, you can have an intelligent and easy to operate package for your fatigue testing requirements.

Technical data:
  • Loads: 5 or 20kN
  • Dynamic stroke/displacement: up to 4mm
  • Static Stroke/displacement: up to 450mm
  • .
  • Test frequencies: 40 - 250 Hz
  • Power consumption magnet: <500 Watt
  • Electromagnetic resonance drive
Features:
  • Low energy consumption due to resonance drive
  • High test frequencies, short test durations
  • No additional devices (hydraulics, cooling, etc.) required
  • Independent drive by magnetic interferric space
  • Maintenance-free system
Mikrotron Resonant Fatigue Testing Machine - Low-Load  Fatigue Testers
Applications

Resonant Fatigue Tester Machines are very often used for fatigue tests (S/N - curves) or in the fracture mechanics for precracking and crack propagation tests. This principle has many advantages compared to servo-hydraulic machines.

All types of tests with a high number of load cycles are beneficial applications for resonant testing machines because of the high testing frequency, and as a result very short testing time as well as very low power consumption.

The additional advantage in comparison to servo-hydraulic systems with its actuators, valves and pumps is that maintenance is not required due to the wear resisting construction.

  • Fatigue tests (S/N-curves) in R&D and quality control
  • Fatigue crack growth investigations (fracture mechanics)
  • ΔK-Threshold determinations (fracture mechanics)
  • precracking of fracture mechanic specimens
  • blocked random tests
Mikrotron Resonant Fatigue Testing Machine - Low-Load  Fatigue Testers
 
Special Spring

Round specimen with induction furnace

Round specimen with induction furnace

Component 'Valve Lifter'

Component "Valve Lifter"

Special Spring

For further information or to place an order for the Mikrotron Resonant Fatigue Testing Machine - Low-Load Fatigue Tester, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button