MMX-6 Multi-Mode Ultrasonic Thickness Gauge
The MMX-6 is a Multi-Mode thickness gauge that has the ability to measure through painted or coated surfaces and eliminate the thickness of the paint using a dual element style transducer in echo-echo mode. The MMX-6 can also effectively find pits and flaws with the press of a single button. The MMX-6 has all the features of the MX-3 plus: An audible and visual alarm mode. In alarm mode, the user can set a nominal thickness value. When measurements fall above or below the set nominal value, a red light and audible beeper is displayed and sounded. The MMX-6 is also equiped with an RS232 port out. This enables the user the ability to send measurements to an external data collection device or directly to a PC.
MMX-6DL Data Logger Ultrasonic Thickness Gauge
The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.
|For current pricing and special offers please contact us||How to Order||How to Order|
|Standard Kit includes: Gauge, transducer, transfer software, RS232 cable, couplant, manual, carrying case, and 5 years limited warranty.|
The MMX-6 series thickness gauge is a simple to use hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and eliminate the thickness of the paint or coating. The MMX-6 uses a dual element style transducer. With the single press of a button, the MMX-6 can be switched between pit or flaw mode ( pulse-echo), and through paint/coatings mode (echo-echo) for maximum inspection efficiency. The MMX-6 is equipped with a bundle of features to make your job eaiser: Alarm mode, high speed scanning, and data send are the main features of the MMX-6.
Applications: Corrosion & Pitting, Tube & Pipe, Tanks, Boilers, Glass, and a Variety of other Applications
Weight: 10 ounces
Resistant to impact and environmentally sealed.
1 to 10 MHz frequency range.
Special high damped transducers available for use with through paint or coating measurements).
Locking quick disconnect LEMO connectors.
Custom transducers available for special
Two 1.5V alkaline or 1.2V NiCad AA cells
Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Backlight is selectable:
Measurements displayed in inches, inches/microsecond. millimeters, and mters/second.
Bar graph indicates stability
Data Logger (On MMX-6DL only)
Automatic numeric Data Logging system 1 to 1000 readings.
5 year limited
Pulse Echo Mode(Pit & Flaw Detection):
Echo Echo Mode (Thru Paint & Coatings):
Switch to select English or metric units.
Stainless steel reference disk for probe zeroing.
Four readings per second for single point measurements or 16 per second in scan mode – captures the minimum thickness.
Single and Two point calibration option included.
Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.