Multi Mode Ultrasonic Thickness Gauge - MMX-7
 
MMX-7 Multi Mode Ultrasonic Thickness Gauge

Multi Mode Ultrasonic Thickness Gauge - MMX-7

Download MMX-7 Multi Mode Thickness Gauge PDF Download MMX-7 Multi Mode Thickness Gauge PDF

The MMX-7 has all features of the MX & MMX gauges with some additional features and advantages. Selectable Large Digits and B-Scan display options. An Internal data logger that stores a total of 12,000 readings and waveforms, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and selectable low, med, or high gain options. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to mention, portability! The MVX/PVXview or java based PC software makes this thing a complete kit, and then some!

Use the Multi-Mode (Echo-Echo mode) feature to measure tanks and tubing with or without paint and coatings with a built-in automatic gain control. The time-based B-Scan feature of the MMX-7 displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Selectable low, medium, and high gain settings offer the inspector multiple gain options a variety of materials. The variety of calibration options is just one more example of the MMX-7's versatility. Store up to 64 custom setups. Factory setups are available for common applications.

MMX-7 is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs. Built-in transducer types offer increased linearity between transducer frequencies and diameters. The Fast Scan feature provides a better representation during the scanning process, by making 32 measurements per second. Remove the transducer from the test material to display the thinnest measurement found. Use the visual and audible alarm to set Hi and Lo limits to signal the inspector when the measurements are out of tolerance. The MMX-7 also comes complete with our Windows® PC software for transferring data to and from a PC. Viewing B-Scans and general measurements, set break-points, view statistics, and export files into excel. 2 year limited warranty.

UMX Underwater Enclosure Kit for MX-3 Ultrasonic Thickness Gauge MMX-6 / MMX-6DL Series Ultrasonic Thickness Gauge - 2 year warranty
Ordering Guide
Model : MMX-7
For current pricing and special offers please contact us How to Order
Standard Kit includes: Unit, Standard Transducer, Couplant, Manual, Plastic Carrying Case, AA Batteries, PC Software and Transfer Cable and 2 years limited warranty.
 
Specifications for the Multi Mode Ultrasonic Thickness Gauge - MMX-7:

Physical

Weight:
13.5 ounces (with batteries).

Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).

Operating Temperature:
-14° to 140°F (-10° to 60°C).

Keyboard:
Membrane switch with twelve tactile keys.

Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8 in. VGA grayscale display
(240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes:
Pulse-Echo (flaws, pits)
Echo-Echo (thru-paint).

Pulser:
Square wave pulser

Receiver:
Selectable low, medium, or high gain in Pulse-Echo mode or AGC gain control in Echo-Echo mode.

Timing:
20 MHz with ultra low power 8 bit digitizer.

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)

Auto power off if idle 5 min.

Battery status icon.

Measuring Range:

Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).

Echo-Echo Mode: Thru Paint & Coatings) measures from 0.05 to 4.0 inches (1.27 to 102 millimeters).
Range will vary +/- depending on the thickness of coating.

Resolution: +/- .001 inches (0.01 mm)

Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec

Single and Two point calibration option, or selection of basic material types.

Units: English & Metric

Display

Display Views:

Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).

B-Scan Cross sectional view. Display speed of 15 secs per screen.

Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph Bar graph indicates stability of reading.

Data Logger (Internal)

12,000 readings and B-Scans (alpha numeric storage).

OBSTRUCT to indicate inaccessible locations.

Memory: 16 megabit non-volatile ram.

Transducer

Transducer Types: Dual Element (1 to 10 MHz).

Locking quick disconnect “ 00” LEMO connectors.

Standard 4 foot cable.

Custom transducers and cable lengths available for special applications.

Features

Setups: 64 custom user-definable setups.
Factory setups can also be edited by the user.

Selectable Transducers:
Selectable transducer types with built-in dual path error correction for improved linearity.

Alarm Mode:
Set hi and lo tolerances with audible beeper and visual LEDs.

Fast-Scan Mode:
Takes 32 readings per second and displays the minimum reading found when the transducer is removed.

Certification

Factory calibration:

traceable to national standards.

Warranty

2 year limited

For further information or to place an order for the Multi Mode Ultrasonic Thickness Gauge - MMX-7 CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button