Motorized Hardness Tester ESATEST MTR
Motorized Hardness Tester ESATEST MTR

Motorized Hardness Tester ESATEST MTR

For Hard to Access Areas

Handy ESATEST X is a portable electronic hardness tester which operates according to the principle of hardness determination through measure of electrical resistance. One simple indentation is to get all values corresponding to the different loads and on any type of metal.

Readings are provided on the display in Vickers, Rockwell C and other scales upon request.

The Diamond indenter can be compared to a little potentiometer, which gradually penetrating into the material, obtains all the data (load-hardness) during the whole phase of load application.

With ESATEST X working principle, it’s now possible with simple indention to get all values corresponding to the different loads up to the maximum load applied thus allowing getting an indicative evaluation of the heat treatment status. The measurement is not influenced by deflection or bending of the specimen.

Note: Handy Esatest X permits hardness testing of all types of metal without changing the penetrator.

Motorized Hardness Tester ESATEST MTRMotorized Hardness Tester ESATEST MTR
Motorized Hardness Tester ESATEST MTRMotorized Hardness Tester ESATEST MTR

 

Technical Specifications of the ESATEST MTR
ReadingBacklit LCD 80mm x 30 mm
Test LoadProgressive application from 1 kp to 10kp (9.81N-98, 1N)
Available ScalesHRC, HRB, HV, HRA, Brinell HB30,ZNmm²,HRF (other scales on request)
MemoryUp to 1000 values in 8 files
Selectable functionsScales, tolerances, calibration, language selection, load time, statistics
OutputsUSB & RS 232
Power SupplySingle-phase from 100 VAC – 230 VAC. 50/60 Hz with earthing or rechargeable batteries ( 8 hours autonomy)
Operating temperature10-40°C
Gross Weight5kg, 9kg
Box dimensions44 cm X 40 cm X 16 cm
Mechanical part 670g
Electronic box780

 

Standard Acessories
Vickers test block calibrated at 1 to 10 kg
V-anvil for round Ø 60mm.
V-anvil for round Ø 30mm.
V-anvil for round Ø 6mm.
Penetrator extention 50mm ( 2 in.)
Support for test block
Kit for non-magnetic materials
Magnetic sensor cable
Pedal
Wooden box
Optional Acessories
Special scales
Spare indenter
80 columns printer
Printer cable
Software for analysis and hardness graphs on PC
Penetrator extentions 75/100/150/200mm - 2.95/3.9/5.9/7.87 inch

 

For more information about Motorized Hardness Tester ESATEST MTR, please call us at 1.877.884.8378 or Click the button below.