Hydrostatic Pressure Tester - HPT Series

If plastic pipes are not made properly, hydrostatic pressure can cause them to burst. To determine the resistance of thermoplastic pipes, a hydrostatic pressure testing system subjects the pipes to constant internal water pressure at a constant temperature. Qualitest's Hydrostatic Pressure Tester provides user-friendly and accurate results to test the strength of thermoplastic pipes.

Qualitest's Hydrostatic Pressure Tester stands out from the competitive with its state-of-the-art pressure control unit. For testing either thermoplastic or reinforced thermosetting resin pipes, pressure can be applied up to a maximum of 20Mpa (200 bar). The test tank is made of stainless steel, equipped with a heat-protection layer that is 100mm thick, and opens via air cylinder, which makes these testers very easy and safe to operate.

Ultrasonic Hardness Tester - UCI-3000D

Companies use several different methods for hardness testing, the most common being Brinell, Rockwell, Vickers, Leeb. However, there are disadvantages to each method: for Rockwell and Brinell, testing may lead to damage on the surface of a sample; for Vickers, only professional technicians are able to carry out tests smoothly; and for Leebs, the testing method is indirect, which may lead to a large deviation when converted to other scales.

Synchronous Thermal Analyzer - QT-STA100

To study the properties of materials as they change temperature, companies often use a thermal analyzer on product samples. There are many types of thermal analyzers, spanning different properties that can be measured as a sample undergoes various material changes.

Air Permeability Tester for Cement

The QualiPERM Blaine Air Permeability Tester is the ideal instrument for measuring the fineness of the cement, which companies do to determine such qualities such as speed of setting and rate of strength development. The Tester works by applying air pressure through a sample under pre-defined conditions to simulate different industrial standards.

The sleek design of our QualiPERM Blaine Air Permeability Testers for Cement and Powders allows for the testing units to be placed conveniently atop any bench within your facility. Qualitest’s family of QualiPERM Blaine Air Permeability Testers are available with manual (QualiPerm I), semi-automatic (QualiPerm II, III, & IV), or fully automatic air pumps (QualiPerm V), and varying numbers of load cells to increase testing capacity.

X-Ray Fluorescence Spectrometer - EDX 800

An x-ray fluorescence spectrometer is an instrument used for chemically analyzing rocks, minerals, and sediments. As such, it is a highly valuable tool in a number of industries, including precious metal and ornamental processing industries, as well as banks and shops that sell gold and other ornamental metals.

Qualitest’s EDX 800 X-Ray Fluorescence Spectrometer Precious Metal Analyzer is a state-of-the-art precious metal tester by virtue of its unique configuration, intelligent testing software, and user-friendly interface. With its intuitive design and efficient test time, analyzing precious metals has never been easier.

Optical Sorting Machine

A production line in a manufacturing facility is an extremely hectic, demanding place. There are many small objects and pieces of equipment that must be kept managed and organized to ensure that operations run smoothly and that tools remain close at hand.

To help manufacturers organize small metallic objects on production lines, such as screws, rivets, and bolts, Qualitest offers its line of optical sorting machines. Designed to accommodate flexibility over a wide range of parameters, Qualitest’s optical sorting machines can measure and recognize very specific features of objects including hardness, thread numbers, heat treatment, surface defects, and many more.

Qualitest’s optical sorting machines have user-friendly interfaces and save valuable time for manufacturers. Equipped with high quality cameras, these powerful machines are the most cost-effective solution for maintaining order and increasing efficiency on production lines.

Frazier 2000 Differential Pressure Air Permeability Tester

Qualitest’s Frazier Air Permeability Tester enables companies to measure the air permeability of a wide range of products including textile materials, paper, air and water filters, foam, and metal screens. These machines use a calibrated venturi nozzle testing method, combined with a wide differential pressure range, to achieve reliable and repeatable testing.

Qualitest offers a variety of air permeability models, ranging from the cost-effective manually operated units, to the more sophisticated automated models. All models are very accurate, conducting tests that are repeatable to within +/-2%, and maintain their calibration over long periods of time without maintenance. 

Table-top Reversed Metallurgical Microscope

To study metals, laboratory technicians must measure and view the surfaces of material samples using a metallurgical microscope. For capturing such surface images and video, technicians turn to the metallograph.

Qualitest is pleased to introduce the XJP-6A Advanced Inverted Metallurgical Microscope - Metallograph, a table-top reversed model featuring a rotatable precision quadruple nosepiece. Equipped with a polarized light set and halogen 6V20W illumination, the XJP-6A allows for clear crystallographic analysis.

With a binocular head and separate photo tube for photography and video, a large mechanical stage (7x6 inch), and co-axial coarse and fine line focus control, the XJP-6A provides ideal conditions for measuring, viewing, and studying material samples.

Charpy Specimen Machine – CNM

To determine the notch toughness of steel products, laboratory technicians conduct Charpy impact tests. These tests create V and U notches in a material sample to gauge how much energy it absorbs when fractured.

Qualitest offers a state-of-the-art Charpy Specimen Machine, which enables technicians to produce 10mm square Charpy test specimens independently, without waiting for machine shop time. Capable of machining up to four samples at once, Qualitest’s Charpy Specimen Machine works on samples up to 16mm square, using a five-blade cutter with easily replaceable inserts.

Metallography Polisher - QualiPol-Auto - Automatic Polishing Machine

Polishing metals for industrial applications is about more than just appearance: this process is necessary to prevent corrosion and oxidation of metal products, which improves their lifespan and durability. Metallography polishers are sophisticated machines that are used to polish metal samples in order to establish standards that can be applied on an industrial scale.

Qualitest offers a complete and competitive range of metallography polishers, available in a wide variety of configurations (Basic Manual Wheels, Semi Automatic, and Fully Automatic) to meet all industry requirements.