Main Features of 300J, 450J & 600J IMPACT Charpy Impact Tester for Metals
The lifting of the hammer is performed by a motorized system, for automatically resetting of the instrument after each test Specimen loading is done via a special device which automatically centers the specimen on the supports The digital console is complete with backlight LCD display and keyboard with tactile membrane The control unit allows selection of each test type, with the corresponding reference standard. The results can be displayed in sequence on the display and stored in the memory The results can be printed or handled by a dedicated software installed on PC. The knife can be equipped with instruments for dynamic analysis of the absorbed energy during the specimen impact This advanced system fully meets the requirements of ASTM E-23 and EN 10045/1 standards, with outstanding quality and user-friendliness

Main Features of 300J, 450J & 600J IMPACT Charpy Impact Tester for Metals

The lifting of the hammer is performed by a motorized system, for automatically resetting of the instrument after each test
Specimen loading is done via a special device which automatically centers the specimen on the supports
The digital console is complete with backlight LCD display and keyboard with tactile membrane
The control unit allows selection of each test type, with the corresponding reference standard. The results can be displayed in sequence on the display and stored in the memory
The results can be printed or handled by a dedicated software installed on PC.
The knife can be equipped with instruments for dynamic analysis of the absorbed energy during the specimen impact
This advanced system fully meets the requirements of ASTM E-23 and EN 10045/1 standards, with outstanding quality and user-friendliness

See Also