PR-8² Sonic Tester
PR-8², has been tuned specifically for racing applications. Engine rebuilders use this gauge for cylinder and head porting. Chasis builders use the gauge for tube inspections.
|PR-8² Sonic Tester||Please contact us for current special offers How to Order|
|Standard Kit includes: Gauge, Choice of Transducer, Couplant, Manual, Carrying Case, and 5 year limited warranty.|
|Specifications of PR-8² Sonic Tester for Racing Applications:|
The PR-8² sonic tester has been modified for the automotive industry. This gauge is commonly used for measuring the thickness of cylinder walls, head ports, decks, tubing, body panals, and windshields. It also has the ability to scan the length of a part to find the the minimum thickness.
The PR-8² is backlit and the unit operates for up to 200 hours on a single set of batteries.
The PR-8² is protected by 5 year limited warranty.
Applications: Cylinder's & Pitting , Head Ports & Pipe, Roll Cages, Body Panels, Chasis, and a variety of other applications
Physical Weight: 10 ounces
Operating Temperature: -20 to 120F (-30 to 50C)
resistant to impact and is environmentally sealed.
Locking quick disconnect Lemo connectors.
Typically operates for 200 hours on alkaline and 130 hours on NiCad.
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.
Measurements displayed in inches, iches/microsecond, millimeters, and meters/second.
Bar graph indicates stability or reading.
Factory calibration traceable to national standards.
5 year limited.
Measures from 0.040 to 1.50 inches (0.63 to 199.99 millimeters) in casted materials.
Switch to select English or metric units.
Stainless steel reference disk for probe zeroing.
Four readings per second for single point measurements or 16 per second in SCAN mode.
Single and Two point calibration option included.