Product Catalogue/Brochure

Precision A-Scan Ultrasonic Thickness Gauge - PVX
Precision A-Scan Ultrasonic Thickness Gauge - PVX

The new A-Scan Ultrasonic Thickness Gauge - PVX Precision A-Scan Ultrasonic Thickness Gauge is the latest addition to our precision line of instruments. It's equipped with a ton of features and capabilities to handle all those critical applications requiriing that extra precision. The PVX uses a variety of transducer types including pencil, standard delay line, and contact styles. All those applications with minimum access or contact areas, are a perfect fit for the PVX using our pencil style transducers with complete confidence and accuracy!

The combination of our PVX and special graphite delay line transducer handles all those thin plastics applications with ease. If you're faced with a number of different types of applications from thick materials to very thin materials, simply switch transducers and go to work! The alpha numeric data storage and PC software included with the PVX has your reporting requirements covered.

Adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements. Selectable viewing options provide the user with additional flexibility during operation: (RF waveform, +/- Rectified waveform, and Large Digits with Scan Bar.

Time based B-Scan feature displays a cross section of the test material. Displays the profile of the opposite surface of the material.

Adjustable resolution settings add to the A-Scan Ultrasonic Thickness Gauge - PVX Precision A-Scan Ultrasonic Thickness Gauge’s flexibilty.

Ability to use a variety of single element transducers for specific applications: Standard Delay Line (acrylic and graphite tips for metals and thin plastics), Pencil Delay Line (tough access area on thin materials), and Contact transducers (variety of applications).

Hardware AGC gain control for multiple echo and thru-paint measurement.

Multiple calibration options: One Point, Two Point, or selection from a Material List.

16 factory setups and 48 user-defined setups. User defined setups can be edited for custom applications.

PVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.

The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.

Visual and audible alarm with hi and lo limit settings for specific application tolerances.

Auto find features locates the detection point(s) and adjusts the display settings to bring the waveform into view.

PVX comes complete with our Windows® PC software for transferring data to and from a PC.

2 year limited warranty

Specifications of A-Scan Ultrasonic Thickness Gauge - PVX Precision A-Scan Ultrasonic Thickness Gauge:

Physical

Weight:
13.5 ounces (with batteries).

Size:
2.5 W x 6.5 H x 1.24 D inches
(63.5 W x 165 H x 31.5 D mm).

Operating Temperature:
-14° to 140°F (-10° to 60°C).

Keyboard:
Membrane switch with twelve tactile keys.

Case:
Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).

Data Output:
Bi-directional RS232 serial port. Windows® PC interface software.

Display:
1/8 in. VGA grayscale display (240 x 160 pixels). Viewable area 2.4 x 1.8 in. (62 x 45.7mm).
EL backlit (on/off/auto).

Ultrasonic Specifications

Measurement Modes:
Pulse-Echo (Precision General purpose).

Interface-Echo (Precision - Thick materials).

Echo-Echo (Precision - Thin materials & thru-paint).

Pulser:
Square wave pulser with adjustable pulse width (spike, thin, wide).

Receiver:
Manual or AGC gain control with 40dB range, depending on mode selected.

Timing:
40 MHz with ultra low power 8 bit digitizer.

Certification

Factory calibration: traceable to national standards.

Warranty: 2 year limited

Power Source

Three 1.5V alkaline or 1.2V NiCad AA cells.

Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)

Auto power off if idle 5 min.

Battery status meter.

Measuring Range:

Interface-Echo Mode: Steel 0.05 1.0 in (1.27mm - 25.4mm). Plastics from .005in. (127mm).

Echo-Echo Mode: Steel .006in -.500in (.15mm - 12.7mm).

Pulse-Echo Contact: Steel .040in - 10.0in (1mm - 254mm). Plastics from .010in (.254mm).

Echo-Echo Contact: Steel thru-paint .100in - 3.0in (2.54mm - 76.2mm).

Resolution: (selectable) +/- .001in (0.01 mm), or +/- .0001in - (.001mm).

Velocity Range:
.0492 to .3936 in./ms 1250 to 9999 meters/sec

Single and Two point calibration option, or selection of basic material types.

Units: English & Metric

Display

Display Views:

A-Scan Rectified +/- (half wave view) RF (full waveform view)

B-Scan Time based cross section view. Display speed of 15 secs per screen.

Large Digits Standard thickness view. Digit Height: 0.400 in (10mm).

Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.

Repeatability Bar Graph Bar graph indicates stability of reading.

Data Logger (Internal)

12,000 readings and waveforms (alpha numeric storage).

OBSTRUCT to indicate inaccessible locations.

Memory: 16 megabit non-volatile ram.

Transducer

Transducer Types:

Single Element (1 to 20 MHz).

Locking quick disconnect “ 00” LEMO connector.

Standard 4 foot cable.

Custom transducer and cable lengths available.

Features

Setups: 16 factory and 48 user-defined setups.

Gates: Single gate in pulse-echo mode. Single gate with holdoff in interface-echo, echo-echo, and plastics mode. Adjustable threshold.

Multiple Measurement Modes:
Selectable modes for use with a variety of applications.

Alarm Mode: Set hi and lo tolerances with audible beeper and visual LEDs.

Fast-Scan Mode:
Takes 32 readings per second and displays the minimum reading found when the transducer is removed. Display continuously updates while scanning.

For more information about Precision A-Scan Ultrasonic Thickness Gauge - PVX, please call us at 1.877.884.8378 or Click the button below.