Primary Adhesive Tester - Tack, Rolling Ball Adhesive Tape Tester

ASTM D 3121, JIS Z0237, GB 4852

Primary Adhesive Tester

Primary adhesive tester is designed and manufactured according to GB 4852, compatible with ASTM D 3121. It is applicable in tack tests of pressure sensitive adhesive tapes, adhesives, adhesive products.

Principle

The Primary Adhesive tester employs the rolling ball principal. The test is conducted by bringing the adhesive in contact with steel balls under a low pressure and forming a bond. The strength of the bond is measured immediately following this contact.

Configuration

Incline panel, ball-placing tool, supporting shelf, adjustable parallel base and steel balls.

Technical Specifications for Primary Adhesive Tester
Item	Description
Adjustable angle	0~60 degrees
Width of panel	120mm
Test area width	80mm
Standard steel balls	1/32 ~ 1 inch
Dimensions	320(L) mm x 140(B) mm x 180(H) mm
Net weight	6kg

For further information or to place an order for the Primary Adhesive Tester - Tack, Rolling Ball Adhesive Tape Tester, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button