Ultrasonic Crawler System - Scorpion BP UT Crawler

Remote, Irrigated Ultrasonic Crawler

• Pressurised water supply
• Remote operation with height restrictions
• 12VDC self contained system

The Scorpion BP is a rugged remote access ultrasonic crawler designed to allow cost effective ultrasound thickness measurements on above ground ferro-magnetic structures without the need for costly scaffolding or rope access.

The Scorpion BP remote access ultrasonic crawler comes supplied with an irrigated dual 5MHz transducer fed from a pressurized stainless steel reservoir. The use of a specially designed mounting block means only a film of water is required as a couplant and the use of a pressurized system eliminates air bubbles commonly found with pumped systems. A single tank of water (11 litres) is normally sufficient for inspection of the 4 cardinal points on a 50 foot high storage tank.

The system is compatible with ANY ultrasonic system and is supplied with a lightweight, flexible 30 metre umbilical cable as standard. The system is battery operated and is powered by the Sitemaster 30 battery pack which is capable of 8 hours operation on a single charge.

Pictures below show the Scorpion scaling a tank:

Technical and Performance Specifications
Dimensions	Length 385mm x Width 222mm x Height 102mm
Weight without Cables	4.75 Kg
Adhesion	Neodymium iron boron magnets mounted in centre of carriage
Pull off Force	13.6 Kg
Drive	four (4) independent 12 volt Dc motors
Drive Wheels	Coated in special non-slip synthetic rubber compound
Speed	25mm/second
Umbilical Cable	Length 30 metre, weight 3.9 Kg
Transducer	Water irrigated 5Mhz dual/twin compression transducer
Near surface resolution	2.5mm
Power Supply	28 Ah sealed lead acid gel battery pack with integral charger
Test Time	8 hours complete system

For further information or to place an order for the Ultrasonic Crawler System - Scorpion BP UT Crawler CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button