Qualitest offers Charpy / Izod Impact Testers with capacities up to 750J meeting and exceeding ASTM E23, ISO, DIN, JIS, standard requirements.
Gardner impact testers, available in a few variations have gained wide acceptance as a means of testing the impact resistance of many types of coatings from paints and vanishes to tough plated, plastic or laminated coatings.
Qualitest offers a wide range of pendulum Charpy / Izod impact testers for tests according to the relevant test standards such as ASTM D256, ASTM D6110, ISO 179, ISO 180, as well as other DIN, ASTM, and ISO standards.
Scott Internal Bond Impact Tester is used to test the energy absorption as well as the peeling strength of the card boards impacted by the specified load at a certain angle.
Our series DX-8000 falling dart impact testers, is a simple to use stand-alone, non-instrumented tester, for measuring impact resistance of film, sheet, and laminated materials.
The QPI-IC Basic Izod Impact Tester determines the energy required to break standard plastics impact specimens.
Digital Charpy/Izod Impact Tester - Q-Impact 25 is a high performance impact tester designed to precisely determine the absorbed impact energy and resistance to breakage of plastic specimens.
The Q-Impact 50 High Performance Charpy/ Izod Impact Tester is a high performance impact tester designed to precisely determine the absorbed impact energy and resistance to breakage of plastic specimens.
The Notcher for Impact Test Specimen machine can cut various depths for V shapes according to standards.
The Falling Weight Impact Tester is used to perform impact tests on plastic pipes, conforming to ISO 3127, EN744 and EN1411.
PIES, our revolutionary Portable Impact-Echo System is an advanced instrument for non-destructive detection of flaws and defects in a variety of civil infrastructures ranging from bridges, parking structures and buildings to dams, piles, tunnels, tanks and marine structures.
The test inspection can be executed by means of falling a stipulated hammer form 100mm height onto the test specimen which laid flat on the steel block and then checking whether there are damages on the insulation cover, sheaths and protective coverings.
Impact Soil Tester is used to obtain an indication of the degree of compaction of soil in road construction.
The Q-Impact 5 impact testers are high performance impact testers designed to precisely determine the absorbed impact energy and resistance to breakage of plastic specimens.
Pendulum Impact Testing Machine QT-PIT is one of its kind of state of art Charpy Impact Testers for Metals build of integrated mainframe and base design, symmetric pillars, and beam supported pendulum shaft.
QT-MIT manhole impact tester is used to test the impact performance of manhole base and manhole wall.
Qualitest offers a Drop Dart Impact Tester which is simple to use as a stand-alone, non-instrumented tester. It is used to measure impact resistance of film, sheet, and laminated materials.
Film Impact Tester - QT-FIT-3J is widely used in research institutes, quality control laboratories, packaging industries, and inspection agencies and so on, to test the impact resistance (toughness) of various packaging films, metal foils, coated paper etc.
Falling Dart Impact Tester - QT-FDIT determines the energy required for plastic films and foils to fail under the impact of a free falling dart under specific conditions.
V-Notch Sampling Machine is used for cutting the specimen of impact test.