Certified Coating Thickness Standard

Certified thickness standards are ideal for checking calibration and operation of coating thickness gages and are an important component in fulfilling both ISO and in-house quality control requirements. All standards described below are supplied with a certificate of calibration showing traceability to NIST/NPL.

Calibration Standards

• Ideal for use in the calibration lab
• Used to verify the accuracy of a magnetic, eddy current or ultrasonic coating thicknes gage over its complete thickness measuring range
• Standards with steel or aluminum substrates consist of four (4) standards mounted in a durable leatherette binder
• Plastic thickness standards consist of four (4) polystyrene standards supplied in a rugged acrylic storage box

Ideal for use with magnetic, eddy current and ultrasonic coating thickness gages

Select the Calibration Standard that most closely matches the range of your gage.

All standards above are supplied with a certificate of calibration showing traceability to NIST/NPL.

Coating Thickness Standards, are a Benchmark for your Coating Procedures and Comply with the requirements of AS3894.3-2002.

Calibration Features

Calibrating and checking the accuracy of all coating thickness instruments. Sets are available as Ferrous or Non-ferrous Standards, and consist of a zero, and four coated plates. Certification is traceable to International Standards via UKAS/NIST Certified equipment. Supplied with NATA Endorsed certificate. All standards are housed in a leatherette folder. Available in combined imperial/metric ranges. The thickness of each plate can be manufactured to your requirement.

Specifications
Plate size 35 x 35 x 2mm (up to 550µm); 43 x 43 x 2mm (above 550µm). Base material Steel(Ferrous); Aluminium(Non-Ferrous). Thickness material Epoxy (up to 550µm); Acrylic (above 550µm). Resolution 0.01µm Uncertainty of Measurement ±0.25µm at 95% confidence level (up to 6000µm); ±0.4µm at 95% confidence level (6000µm to12500µm) Area of measurement  Centre of white exposed area

Thickness Ranges - Ferrous & Non-ferrous:

• 10µm to 50µm (in 5µm increments)
• 50µm to 100µm (in 10µm increments)
• 100µm to 200µm (in 25µm increments)
• 200µm to 500µm (in 50µm increments)
• 500µm to 1000µm (in 100µm increments)
• 1000µm to 1500µm (in 250µm increments)
• 1500µm to 12500µm (in 500µm increments)

Example Sets

• Heavy Duty Coating
  0, 75, 150, 250, and 500µm
• Galvanising
  0, 50, 80, 125, and 200µm
• Powder Coating
  0, 35, 75, 125, and 175µm
• Plating & Anodising
  0, 10, 15, 20 and 40µm
• Ultra High Builds
  0, 750 to 12500µm

Ordering Info for Standards
Code	Description	Internet Price	Buy Now!
CAL S Series	Epoxy on Steel (4 Plates)	US $345.00
CAL A Series	Epoxy on Aluminum (4 Plates)	US $345.00
CHK PF1	Epoxy on Steel (3 Plates)	US $295.00
CHK PN1	Epoxy on Aluminum (3 Plates)	US $295.00
CAL C1	Individual Plates (misc. thickness available)	US $95.00
CAL P Series	Polystyrene	US $175.00
CAL CSS	Certified Plastic Shim Set (8 Shims)	US $195.00
CAL CS Series	Indivisual Certified Shims (misc. thickness available)	US $45.00

For further information or to place an order for the Certified Coating Thickness Standard, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button