Warning: Cannot modify header information - headers already sent by (output started at /home/88/21/2912188/web/toninorm.htm:1) in /home/88/21/2912188/web/includes/config.php on line 50
Modular Testing System for Building Materials
 
Modular Testing System for Building Materials
 
ToniNORM 3000kN Concrete Compression Test Machine with ToniTROL Digital Control System
ToniNORM 3000kN Concrete Compression Test Machine with ToniTROL Digital Control System
ToniNORM 10,000kN Concrete Compression Test Machine with Integrated ToniTROL Control System
ToniNORM 10,000kN Concrete Compression Test Machine with Integrated ToniTROL Control System

Modular Testing System for Building MaterialsToniNORM

For Determination of Compression Strength on Concrete Cylinders and Cubes

ToniNORM is one of the world’s most advanced compression test systems. The compact ToniNORM is perfect for a laboratory environment. With ToniNORM measuring and control system, the entire testing procedure from machine setup to data recording, is controlled with full digital accuracy. The software programming for the system allows hands-off testing to ensure technician safety and testing accuracy. ToniNORM, along with the rest of the ToniLAB test systems, can be operated and monitored remotely through a computer network connection.

ToniNORM is available in testing loads from 200kN (45,000lbs) to 10000kN (2,270,000lbs). The most common strength testers are 2000kN, 3000kN, 4000kN, 5000kN and 6000kN.

ToniNORM features:

  • A top quality fixed rigid frame
  • A hardened piston and cylinder
  • An upper tilting spherical ball seat
  • A digital control column measuring system.

Rigid Frame: The four-column rigid frame is fully clamped to ensure there is minimal play and deflection even at the highest machine test loads. The servo valves for oil pressure are integrated into the base of the machine.

Piston and Cylinder: Mounted at the base, the plunger piston is hardened to ensure minimal deflection. The piston is equipped with a protection cap and stroke indicator.

Spherical Ball Seat: The bearing blocks are similarly hardened (=HRC 55) to ensure maximum test specimen compression. The upper bearing block can tilt up to 3º to any side to allow for top surface angle.

The lower bearing block is equipped with a crosshair and 6.10” (155mm) diameter centering ring. The maximum daylight between the platens without the auxiliary plates is 13.4” (340mm) which can be reduced to 10.8” (275mm) with one auxiliary plate and 8.3” (210mm) with both plates.

ToniNORM 3000kN Concrete Compression Test   Machine with ToniTROL Digital Control System

ToniTROL Digital Control System:
As a modular control system, the ToniTROL can be adapted to your specific testing needs to include up to 100 programmable automatic test procedures, specialized building material testing software and environmentally protected data transfer and interface system.

ToniTROL is capable of controlling and monitoring up to three load frames, 13 peripheral sensor interfaces and extended test and specimen data storage. The software can be upgraded at need should your ToniLAB expand to include other automated concrete or cement test systems.

Special Features:
  • Top quality, rigid load frames
  • Intelligent control system
  • Servo-hydraulic control
  • Class 1 DIN 51220
  • Various software options
  • Capibility of future test expansion
  • Modular system
ToniNORM Model 2091.2000 / 2091.3000
Maximum test load 2000 kN / 3000 kN 450,000 lbs / 680,000 lbs
Distance between columns
Right to left 355 mm 14.0”
Front to back 255 mm 10.0”
Bearing blocks – standard 300 mm Ø 11.8” Ø
With option 2091.xxxx.30 300 x 300 mm 2 11.8” x 11.8”
With option 2091.xxxx.32 320 x 520 mm 2 12.6” x 20.5”
Hardness of Bearing Blocks ≥ HRC 55
Distance between bearing blocks without auxiliary plate 340 mm 13.4”
With one auxiliary plate (2031.xxxx.43) 275 mm 10.8”
With two auxiliary plates (2031.xxxx.44) 210 mm 8.3”
Piston stroke 65 mm 2.6”
Expansion (under maximum load) 1.0 bar 14.5 psi
Working pressure 454 bar 6,583 psi
Pump delivery 1.4 L/min 0.37 gal/min
Oil container capacity 6 L 1.6 gal
Working height without auxiliary plates (upper edge to lower bearing block) 1060 mm 41.7”
With two auxiliary plates 1190 mm 46.9”
Total height with 65mm piston stroke 1740 mm 68.5”
Area required (complete) WxD, net 960 x 500 mm 2 37.8” x 19.7”
Weight, approximate net 1700 kg 3740 lbs
ToniNORM 3000kN Concrete Compression Test   Machine with ToniTROL Digital Control System

Also available is our ToniPRAX for combined bending and compression testing equipment for universal applications. Our more economical M-Line Compression Testing Machines are also available.

For further information or to place an order for the Modular Testing System for Building Materials CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button