Concrete Compression Tester - ToniPACT II
 
Concrete Compression Tester - ToniPACT II

Concrete Compression Tester - ToniPACT II 3000 kN / 660,000 lb.f

For Determination of Compression Strength on Concrete Cylinders and Cubes

For efficient quality control on building materials on construction materials, preferably for quality control tasks on concrete specimens.

Design: Rigid four-column load frame in space-saving compact design. It has a base mounted actuator with plunger piston. The hardened piston and cylinder are microfinished. The piston is equipped with a protecting gap and stroke indicator. Hydraulic elements, servo valve and pressure oil unit (pump delivery 1.4 l/min) are directly installed in the base of the load frame. Volume of oil tank 6 l. The Control column is attached at the right side with integrated power supply aggregates and measuring and control system. The ToniTROL mounted on top.

ToniTROL 'Standard' (Model 0510.010)

The ToniTROL is a computer-controlled measuring and control system for the functions measuring, controlling, monitoring, and evaluating of building material testing machines. It is stored in a compact box including all operating and control elements. Operating system on FlashPROM storage; for input and output functions there are four RS232 interfaces and one centronic interface available. The RAM storage is 256 KByte; which is sufficient for 100 test sequences and approx. 500 test results. Basic version prepared for the connection of three load frames for load controlled test performances. Limited extendable with further software extensions for load controlled tests. It is extendable to ToniTROL 'Expert'.

Basic-software for load (Model 0510.101)

Controlled tests including following functions:

  • Programming of test sequences (load ramps up to specimen’s fracture)
  • Fracture detection and limiting values adjustable via software
  • Possibility to enter dimension and weight of specimen as well as sample identification number
  • Table of contents for selection and start of test sequences
Ordering Info for ToniPACT II Concrete Compression Tester
Part No. Description
2091.3000.000 Compression Test Plant ToniPACT II 3000 kN max. load capacity, without pressure plates

Technical Data:
  • Distance between columns
  • Left / right 355 mm
  • Front / back 255 mm
  • Piston stroke 65 mm
  • Distance between pressure plates 340 mm
  • Deformation (at max. load) 1.0 mm
  • Load measuring range 60...3000 kN Accuracy Class 1 DIN 51220/51223 7.93 Continuous range with automatic decimal point switching
2091.3000.001 Load frame designed in accordance with Standards EN 12390-4 (Straincylinder Conditions).
2091.3000.31 Set of Pressure Plates 300 mm diameter Pressure plates hardened and ground (hardness min. HRC 55). Upper pressure plate ball seated, tiltable by 3°. Lower pressure plate with thread crossing and centric ring 155 mm diameter for easy placing of specimens.
2091.3000.39 Lower pressure plate equipped with waste trap sheet (right and left)
2091.3000.44 Two auxiliary plates, 300 mm diameter x 65 mm height
4400.002 Centering template to be placed on the lower pressure plate of the load frame; suitable for cubes with 150 mm edge length and cylinders with 150 mm diameter (fitting to pressure plates 300 mm diameter)
2091.3000.83 Test area protection consisting of an all-around closed cage, made of profiles with Makrolon panes (high-strength plastic material). Two doors (front and back side) with electrical safety switch.
Options for Compression Test Plant ToniPACT II
2091.3000.002 Load frame with standard ball seat
4090.004 Auxiliary plate, 210 x 210 mm, 115 mm high, hardened and ground.
4090.005 Auxiliary plate, 210 x 210 mm, 50 mm high, hardened and ground.
2091.3000.32 Set of pressure plates dimensions 320 x 520 mm
2091.3000.82 Test area protection consisting of an all-around closed cage, made of profiles with Makrolon panes (high-strength plastic material). One door (front side) with electrical safety switch.
4400.001 Centering template to be placed on the lower pressure plate of the load frame; suitable for cubes with 100 mm edge length (fitting to pressure plates 300 mm diameter).
4400.002 Centering template to be placed on the lower pressure plate of the load frame; suitable for cubes with 150 mm edge length and cylinders with 150 mm diameter (fitting to pressure plates 300 mm diameter)
4400.003 Centering template to be placed on the lower pressure plate of the load frame; suitable for cubes with 200 mm edge length (fitting to pressure plates 300 mm diameter)
2091.3000.39 Lower pressure plate equipped with waste trap sheet (right and left; surcharges).
Options for Raw Data registration:
0510.201 Software module ''Raw Data registration'' necessary for printing a line journal (sample indication and test results) in combination with printer model 0510.612.
0510.612 Printer for direct connection to measuring and control system ToniTROL, model 0510
0510.613 Alphanumeric keyboard; shower water protected with RS 232 serial port for direct connection to the ToniTROL. (Recommended in connection with data transfer software ToniDAT, model 0510.204 for insert of alpha numerical data, furthermore to be used as remote control for all navigation functions of the ToniTROL.)
Option Data Transmission to a PC or LIMS system for storage and evaluation of test results under use of standard software, i.e. MS EXCEL (The software for data registration and evaluation has to be provided by the customer)
0510.204 ToniDAT - Universal file interface for bi- or uni-directional data transmission between ToniTROL and PC. The test results of the ToniTROL are transferred to the PC and filed for external data processing, for instance by Microsoft Excel®. The output range of the test results can be restricted to certain values and order by individual choice.

The file storage can be defined for a single test sample as well as a serial of samples with the opportunity to refresh and continue existing files. The data transfer from ToniTROL to PCcan be done online or offline. The data are latched in the ToniTROL meanwhile.

The test results of the ToniTROL can be transferred and then filed in ASCII format online. Therefore a parameter file needs to be configured; the application works free of interaction in the background (running from Windows 95® up to Windows XP®). Additionally ToniDAT is prepared to handle a file exchange interface from ToniTROL to external LIMS systems.

Prepared sample data can be transferred from LIMS to ToniDAT pre-specified in advance. The samples appear in a select list in ToniDAT to be forwarded step by step to the ToniTROL for the required test procedure.
0510.613 Alphanumeric keyboard; shower waterprotected with RS 232 serial port for direct connection to the ToniTROL. (Recommended in connection with data transfer software ToniDAT, model 0510.204 for insert of alpha numerical data, furthermore to be used as remote control for all navigation functions of the ToniTROL.)
Extension Control of the machine and data acquisition and evaluation with a PC System:
0510.350 Software plug-in testXpert for connection of the ToniTROL inclusive adaptation ToniTROL Hardware minimum requirements
  • Personal-Computer with Pentium(TM)II-Processor
  • Working memory 128 Mbyte or better
  • Hard disk Memory 200 Mbyte free
  • CD-ROM drive for installation
  • Color Monitor with 800x600 resolution (SVGA)
  • Operating system Windows 9x, or Windows NT4.0 / Windows 2000
0510.361.002 Standard test program DIN 1048 T5 Determination of compressive and bending strength of concrete.
0924 PC system (software and operation manual in English language)
consisting of:
  • min. 2,8 GHz processor
  • min. 128 MB RAM
  • hard disc min. 20 GB
  • min. 48-fold CD ROM
  • 1.44 MB 3.5'' disc drive
  • keyboard
  • 3-keys standard mouse
  • Installed MS Windows 2000
0913.011 TFT monitor 17"
  • min. punched mask 0.25 mm
  • min. video-bandwidth 82 MHz
  • min. resolution 128 x 1024, 60 Hz
  • CE certificate TÜV-GS, MPR II
0913.020 Colour ink jet printer
  • format A4
  • min. 600 x 600 DPI with black/white
  • min. 2400 x 1200 DPI with colour
  • Printing power approx.: 8 pages/min
  • 4 MB Ram

For further information or to place an order for the Concrete Compression Tester - ToniPACT II CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button