Ultrasonic Thickness Gauge MMX-6/MMX-6DL

MMX-6 Multi-Mode Ultrasonic Thickness Gauge

The MMX-6 is a Multi-Mode thickness gauge that has the ability to measure through painted or coated surfaces and eliminate the thickness of the paint using a dual element style transducer in echo-echo mode. The MMX-6 can also effectively find pits and flaws with the press of a single button. The MMX-6 has all the features of the MX-3 plus: An audible and visual alarm mode. In alarm mode, the user can set a nominal thickness value. When measurements fall above or below the set nominal value, a red light and audible beeper is displayed and sounded. The MMX-6 is also equiped with an RS232 port out. This enables the user the ability to send measurements to an external data collection device or directly to a PC.

MMX-6DL Data Logger Ultrasonic Thickness Gauge

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. This gives the user the ability to store, and download the stored measurements directly to a PC using our DakView software program. The software and transfer cable are included in the MMX-6DL kit.

Specifications:

The MMX-6 series thickness gauge is a simple to use hand-held Ultrasonic Thickness Gauge with the ability to measure through paint and coatings and eliminate the thickness of the paint or coating. The MMX-6 uses a dual element style transducer. With the single press of a button, the MMX-6 can be switched between pit or flaw mode ( pulse-echo), and through paint/coatings mode (echo-echo) for maximum inspection efficiency. The MMX-6 is equipped with a bundle of features to make your job eaiser: Alarm mode, high speed scanning, and data send are the main features of the MMX-6.

The MMX-6 series come as a complete kit, ready to use, and is backed by 5 year limited warranty.

Applications: Corrosion & Pitting, Tube & Pipe, Tanks, Boilers, Glass, and a Variety of other Applications

Physical

Weight: 10 ounces

Size:
2.5 W x 4.75 H x 1.25 D inches (63.5 W 120.7 H x 31.8 D mm)

Operating Temperature:
-20° to 120° F (-30° to 50° C)

Case:
Extruded aluminum body / nickel plated aluminum end caps.

Resistant to impact and environmentally sealed.

Keypad
Sealed membrane that is resistant to both water and petroleum products.

Nine tactile-feedback keys.

Transducer

Dual element (transmit and receive).

1 to 10 MHz frequency range.

Special high damped transducers available for use with through paint or coating measurements).

Locking quick disconnect LEMO connectors.

4 foot cable.

Optional cable lengths up to 100 feet.

Custom transducers available for special
applications.

Power Source

Two 1.5V alkaline or 1.2V NiCad AA cells

Typically operates for 200 hours on alkaline and 130 hours on NiCad.

Display flashes when battery is low. Unit turns off automatically when battery is too low to operate reliably.

Display

Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions.

Backlight is selectable:
on / off / auto ( illuminates only when taking a measurement ).

Measurements displayed in inches, inches/microsecond. millimeters, and mters/second.

Bar graph indicates stability
of reading.

Data Logger (On MMX-6DL only)

Automatic numeric Data Logging system 1 to 1000 readings.

Certification
Factory calibration traceable to national standards.

Warranty

5 year limited

Measuring Range:

Pulse Echo Mode(Pit & Flaw Detection):
Measures from 0.025 to 19.999 inches (0.63 to
500 millimeters).

Echo Echo Mode (Thru Paint & Coatings):
Measures from 0.100 to 1.0 inches (2.54 to 25.4 millimeters).

Switch to select English or metric units.

Resolution:
0.001 inches (0.01 millimeters)

Velocity Range:
.0492 to .3937 in/m s 1250 to 10,000 meters/sec

Built in:

Stainless steel reference disk for probe zeroing.

Four readings per second for single point measurements or 16 per second in scan mode – captures the minimum thickness.

Single and Two point calibration option included.

Features

Multi-Mode: Toggle between Pit/Flaw detection (Pulse Echo Mode), and through Paint/Coatings (Echo-Echo Mode) with the single press of a button.

Alarm Mode:
Enter a minimum acceptable thickness value. If measurement falls below minimum, red led will illuminate and sound beeper. If measurement is above minimum value, green led will illuminate.

Data Ouput:
RS232 output sends thickness readings to a printer, computer or other external storage device.

 

For more information about Ultrasonic Thickness Gauge MMX-6/MMX-6DL, please call us at 1.877.884.8378 or Click the button below.