Tragbarer motorisierter Leeb-/Ultraschall-Härteprüfer UCI-4100DM

Dynamic Rebound Principles (Portable Motorized Leeb)

The Leeb bouncing technique looks at how much a tiny ball jumps back after it forcefully strikes a surface. This quick method is an absolute winner for massive, chunky metal parts like heavy castings and industrial forgings.

The Physics of the Bounce

A small spring-loaded hammer tipped with a tiny tungsten ball smacks right into the piece you’re checking. As a magnet inside the hammer zips through a wire coil, it creates electricity that tells us how fast it’s moving. 

The tool catches the exact speed of the hitting motion and the speed of the return bounce, figuring out the hardness based on how much energy the metal pushed back.

Materielle Reaktion

Harder materials won't soak up the hit, so that ball is going to fly back fast. If the coarse material is soft, the ball just kind of thuds.

Every part of this testing phase feels smooth and steady, giving you a digital readout that is satisfyingly spot on, which is clear but not confusingly cluttered.

Entscheidender Vorteil

Having a Portable Motorized Leeb module in your hand means you can breeze through large-scale castings or thick engine blocks. 

It’s exceptionally quick at turning those bounce speeds into the standard numbers you’re used to seeing on your charts, giving you an immediate quality assurance check directly on the factory floor.
 

Ultrasonic Contact Impedance (Ultrasonic Hardness Tester)

While the bounce trick is fantastic for large items, checking thin coatings, shiny chrome platings, or the hard carburized layers of a part needs the careful, gentle touch of an Ultrasonic Hardness Tester.

• The Physics of the Hum: This part uses a rod vibrating constantly at a pitch you can’t hear, with a real-deal Vickers diamond stuck on the very end. When that diamond touches your finished molds, intricate gears, or structural shafts under a steady, motorized push, the vibration changes because the metal is "grabbing" the diamond.
• Reading the Frequency: That change in the hum tells the Dynasonic machine exactly how deep the diamond sank. It’s incredibly exact and happens in an absolute heartbeat, proving that the compact handheld design is pure functional perfection.
• Hauptvorteil: Because the contact mark it leaves is so microscopic that it cannot be easily observed, this is the perfect way to check finished manufactured products, sensitive nitriding layers, or those tricky spots right next to a weld. The motorized UCI components move steady and true every single time, handling the pressure for you so you don't have to worry about a shaky hand ruining your precision numbers.
   

Application Selection and Method Constraints

Both ways of checking strength have things they’re undeniably great at and a few tricky spots. This two-in-one UCI-4100DM instrument fixes those problems by letting you swap out probes whenever you need to:

Kalibrierung und Messgenauigkeit

Portable test numbers are a bit like a translation, as they’re matching up what’s happening on the production line to what those big, heavy lab machines would say.

• Tuning the Instrument: To make sure everything stays mathematically true, you keep your gear tuned up using those shiny calibration blocks. The dual-mode tech inside this UCI-4100DM unit is so remarkably sharp that it keeps the wiggle room for errors incredibly small.
• Materialvariablen: The physical shape of your part or how heavy it is can change the bounce, while the "hum" method needs to know if you’re testing standard carbon steel, specialized copper plating, or something more exotic.
• Optimierung der Ergebnisse: Doing things the right way, such as avoiding hitting the exact same spot twice and keeping your spacing perfectly even, makes your gathered data much more reliable. Combining these two testing techniques into one solid kit lets you double-check your work on the spot, ensuring you always walk away with completely trustworthy results.