Electro-Mechanical Dual Column Universal Testing Machine QM-100/200/300/500

Electro-Mechanical Dual Column Universal Testing Machine QM-100/200/300/500

Parent Product
Universal Testing Machine - QM Series
Standards
ASTM E8
ASTM D76
ISO 7500-1
DIN 5122

QM-100/200/300/500 Series Double Column Electromechanical Universal Testing Machines is designed to test both the tensile and compressive strength of various materials such as Plastic, Textile, Metal and Architecture. The machine comes with a large test space and long stroke. Multiple models of width can satisfy large specimen test requirement. The maximum test capacity can reach 100kN with high precision, low noise and maintenance-free of the servo drive system.

We developed the maintenance-free transmission mechanism to reduce machine maintenance problems, at the same time it provides a quiet test environment and high-precision test results. Also, the support precision jog wheel can be fine tuning machine movement, with precision positioning and accurate calibration to increase test accuracy. The high-speed signal feedback mechanism can reduce the chance of machine overload. With the external signal source connected, the machine control mode can be activated.

QM-100/200/300/500 Series is using special testing software which is used Windows 7/8/10 of the personal computer. It can be applied to tensile test, compression test, bending test and all kind of test.  It also comes with all kind of metric units, real-time graphs and also provides complete analysis test data which finish test can do a variety of material analysis. The report configuration can be modified after the test.

Thanks to the multiple control systems, customers can use the optional monitor without connecting a computer (stand-alone) for a simple test. The machine can also connect with computer for more functions.  The external signal function allows external signals to expand the operating modes. The load cell and extensometer of accessories also come with memory function, no need to do troublesome setting when type changed. Speed range variable from 0.0001 to 375mm/min which can meet most of the test standard.

Applications

The UTM is used to evaluate the tensile, compression, bend, and shear properties of materials including metallic materials.

Features/Advantages
  • Automatic reading of load cell feature information
  • Automatic reading of extensometer feature information
  • Force display, displacement display, time display, stress display and strain display
  • External analog input (2-channel simultaneous reading of voltage or current)
  • Test force automatically zero
  • Test force self-defined calibration
  • Break detection
  • Automatic return
  • Force overload protection

 

    Theory/Method

    Summary of Method

    Tensile properties are determined by using test pieces from the sample materials to prepare and test the specimen. These specimens can come in many types such as a plate-types, sheet-types or round pieces of uniform cross-sectional area. Measurements for tensile stress specimens that have to been pre-stressed gives out the tensile stresses elongation, tensile strength, yield point, and ultimate elongation. The cross-sectional area of a specimen provides tensile stress, yield point, and tensile strength.

    Specimens

    Plate-type Specimen (E8)

    This specimen is used for testing metallic materials in the form of plate, shapes, and flat material having a nominal thickness of 3⁄16 in. or over. When product specifications so permit, other types of specimens may be used.

    Sheet-type Specimen (E8)

    This specimen is used for testing metallic materials in the form of sheet, plate, flat wire, strip, band, hoop, rectangles, and shapes ranging in nominal thickness from 0.005 to 3⁄4 in.

    Round Specimens (E8)

    The standard 0.500-in. diameter round test specimen is used generally for testing metallic materials, both cast and wrought. They may be used when it is necessary to test material from which the standard specimen or specimens such as the Plate-type specimen cannot be prepared.

    Conditions Required

    All test equipment should be located and connected to power sources in such a manner as to minimize the effects of vibrations and electrical disturbances on raw data collected, stress-strain charts, and operation of equipment (ASTM D8)

    Procedure

    The specimen is to be placed in the grips of the testing machine, using care to adjust the specimen symmetrically to distribute tension uniformly over the cross section. Determination of the tensile set and set-after-break are all given and calculated after the test, the test result will be the median of three individual test measurement

    Accessories

    Grip and Load Cell

    Each test will require different test grips and accessories for the plastics, metal, biomedical, composite, elastomer, component, automotive, aerospace, textile and other applications industries.

    • Tensile Grip
    • Peeling/Tearing Grip
    • Compression Grip
    • Film Friction Grip
    • Bending Grip
    • Load Cell
    Technical Specifications

    Model

    QM-100

    QM-100-II

    Capacity

    100KN

    Unit

    Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

    Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

    Force Resolution

    31 bits

    Force Precision

    1/100,000

    Test Stroke

    (without Grip)

    1100mm

    Stroke Resolution

    0.0001mm

    Space Between Columns

    550mm (680mm, 800mm optional)

    Speed Range

    0.0002 - 375mm/min adjustable (can be set up by computer)

    Speed Accuracy

    High speed mode: 0.02 - 375mm/min

    Low speed mode:  0.0001 - 2mm/min

    PC-Port

    RJ45(TCP/IP) (Connect software optional)

    Data Sampling Rate

    400Hz max.

    1200Hz max.

    Motor Type

    Servo Motor

    Safety Protection

    Upper limit

    Lower limit

    Emergency stop button

    Dimensions

    1200 × 600 × 2200mm

    1350 × 600 × 2200mm

    Weight

    800kg

    Features
    •  

     

    Model

    QM-200

    QM-200-II

    Capacity

    200KN

    Unit

    Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

    Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

    Force Resolution

    31 bits

    Force Precision

    1/100,000

    Test Stroke

    (without Grip)

    1100mm

    Stroke Resolution

    0.0001mm

    Space Between Columns

    550mm (680mm, 800mm optional)

    Speed Range

    0.0001 - 330mm/min adjustable (can be set up by computer)

    Speed Accuracy

    High speed mode: 0.02 - 330mm/min

    Low speed mode:  0.0001 - 1mm/min

    PC-Port

    RJ45(TCP/IP) (Connect software optional)

    Data Sampling Rate

    400Hz max.

    1200Hz max.

    Motor Type

    Servo Motor

    Safety Protection

    Upper limit

    Lower limit

    Emergency stop button

    Dimensions

    1400 × 660 × 2350mm

    1450 × 660 × 2350mm

    Weight

    1250kg

    Features
    • Automatic reading of load cell feature information
    • Automatic reading of extensometer feature information
    • Force display, displacement display, time display, stress display and strain display
    • External analog input (2-channel simultaneous reading of voltage or current)
    • Test force automatically zero
    • Test force self-defined calibration
    • Break detection
    • Automatic return
    • Force overload protection

     

    Model

    QM-300

    QM-300-II

    Capacity

    300KN

    Unit

    Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

    Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

    Force Resolution

    31 bits

    Force Precision

    1/100,000

    Test Stroke

    (without Grip)

    1100mm

    Stroke Resolution

    0.0001mm

    Space Between Columns

    550mm (680mm, 800mm optional)

    Speed Range

    0.0001 - 330mm/min adjustable (can be set up by computer)

    Speed Accuracy

    High speed mode: 0.02 - 330mm/min

    Low speed mode:  0.0001 - 1mm/min

    PC-Port

    RJ45(TCP/IP) (Connect software optional)

    Data Sampling Rate

    400Hz max.

    1200Hz max.

    Motor Type

    Servo Motor

    Safety Protection

    Upper limit

    Lower limit

    Emergency stop button

    Dimensions

    1400 × 660 × 2350mm

    1450 × 660 × 2350mm

    Weight

    1250kg

     

    Model

    QM-500

    QM-500-II

    Capacity

    500KN

    Unit

    Force: gf, kgf, lbf, N, kN, ozf, tonf(SI), ton(long), tonf(short)

    Pressure: Kpa, Mpa, psi, bar, mm-Aq, mm-Hg

    Force Resolution

    31 bits

    Force Precision

    1/100,000

    Test Stroke

    (without Grip)

    1500mm

    Stroke Resolution

    0.0001mm

    Space Between Columns

    550mm (680mm, 800mm optional)

    Speed Range

    0.0002 - 330mm/min adjustable (can be set up by computer)

    Speed Accuracy

    High speed mode: 0.02 - 330mm/min

    Low speed mode:  0.0002 - 2mm/min

    PC-Port

    RJ45(TCP/IP) (Connect software optional)

    Data Sampling Rate

    400Hz max.

    1200Hz max.

    Motor Type

    Servo Motor

    Safety Protection

    Upper limit

    Lower limit

    Emergency stop button

    Dimensions

    1450 × 850 × 2950mm

    1550 × 850 × 2950mm

    Weight

    2350kg

      Contact Us

      1-877-884-8378