탈기형 급수 시스템 - QualiGTX™ DWS 50

견적 요청

탈기형 급수 시스템 - QualiGTX™ DWS 50

Constant temperature de-aired water unit conditions a 50-liter batch of test water for geosynthetics laboratories running high-volume hydraulic work. The system removes dissolved oxygen and carbon dioxide, then holds the treated water at a setpoint between 15°C and 105°C while a 45 L/min pump delivers it to connected apparatus. Larger tank volume and higher pump output separate this model from bench-scale de-airing equipment. Laboratories feeding several permeameters or running long transmissivity tests draw on one prepared reservoir.

Control sits behind an LCD touchscreen with self-tuning PID regulation and high and low temperature alarms. Dual temperature sensors watch the tank and the surroundings; refrigeration shuts off automatically once the setpoint climbs more than 5°C above ambient, which spares the compressor unnecessary run time. The QualiGTX™ DWS 50 heats a full charge in about 60 minutes and cools it in about 30. Eight protection circuits cover the refrigeration system, including phase sequence, pressure, liquid level, and ambient temperature limits.

Water condition governs the quality of hydraulic test data as much as specimen preparation does. Gas coming out of solution inside a geotextile or drainage core narrows the flow path and pulls measured values downward, while temperature swings alter viscosity and inflate correction factors. This unit removes both variables before water reaches the test stand. External circulation extends its use beyond water supply duty, since the tank can act as a cold or heat source for a second temperature-controlled vessel.

의뢰
인용

메인 페이지로 돌아가기