Proper sample preparation will achieve accurate and consistent results. Most variation in testing occurs before the test is performed as sample preparation plays a major role in final results. These machines are convenient for preparing samples as they ensure a uniform process and save time.
Automated molding steps: place raw material of plastic or rubber into the mold, and press start button to pre-press specimens, then heating, forming and cooling.
Make raw materials be shaped by molding, and become a sample for testing, color comparing or can be used as the basis of factory mass production.
Match with the latest controller, dialogue windows make users understand the setting and process easily.
Users can grasp energy, time and temperature immediately by the controller’s diagram. Furthermore, there are various selections of units; users can save more time from manual calculating.
This machine has two separated (up and down) heating plates. It uses jack to make two plates to clamp and set the plastic or rubber material into the mold then press start bottom to heat, molding, cooling to make the raw material forming. It can do a physical property of test, color comparison and as the sample used in mass-producing purposes. Standard assort with the touch panel in a guided conversation style screen, user can precisely and smoothly proceed with the test. Users can easily have the defined unit calculated value from the built-in unit. Also, display the graph on the panel for users to control testing immediacy information like force, time, and temperature.
Pressure | 10、20、30、50 ton (optional) |
---|---|
Units | Temperature:℃、℉
Area:m2、cm2、mm2、ft2、in2 Energy:kgf、gf、tonf(long)、tonf(short)、lbf、ozf、kN、N、tonf(SI) Pressure:bar、kgf/cm2、KPa、MPa、mm-Aq(4℃)、psi |
Temperature | Room temperature~ 300℃ |
Size of heating plate | 50→150℃ take 18mins |
Heating time | 14 cm(max.) |
Distance between heating plate | 120 mm (Max.) |
Cooling method | Use cooling system to rapidly cool upper and lower mold |
Cooling time | 150℃→60℃ 10mins |
Steps can be set | Pre-press time, press time |
Temperature can be set | Forming temperature, open mold temperature |
Controller | 7” touch screen |
Display | Instant energy, temperature, diagram |
Protection | Full cover, emergency stop button |
Dimension | 128×74×152 cm(W×D×H) |
Weight | 680 kg |
Power | 3 phase 220V/50 or 60HZ |
Pressure(Tons) | 10、20、30、50 (Tons)。Or specified capacity | |
---|---|---|
Units | Temperature:℃、℉ Area:m2、cm2、mm2、ft2、in2 Force :kgf、gf、tonf(long)、tonf(short)、lbf、ozf、kN、N、tonf(SI) Pressure:bar、kgf/cm2、KPa、MPa、mm-Aq(4℃)、psi |
|
Temperature | Room temperature ~ 300℃ | |
Temperature range | Temperature rise rate:50℃ to 150℃ within 18 minutes Cooling rate:150℃ to 50℃ within 10 minutes |
|
Cooling method | Cooling water circulation(optional) | |
Size of heating- plate | 25x25cm(standard) | 30×30 cm (optional) |
Interval distance between heating plates | 60~100 mm(adjustable) | |
Accessory | forming mold for specimen 1set | |
Control | 7” touch panel | |
Display | Immediacy Force、Temperature、Graph | |
Power | Single phase,220V/50Hz or 60Hz | |
Dimension | 53×62×145 cm(W×D×H) | |
Weight | 10 tons: about 200kg 20 tons: about 250kg 30 tons: about 300kg 50tons: about 350kg |
1-877-884-8378