Synchronous Thermal Analyzer - QT-STA100

Synchronous Thermal Analyzer QT-STA100 combines TGA (Thermo gravimetric Analysis) with DSC (Differential Scanning Calorimeter), in which we can get the information of TG and DSC in synchrony using the same sample during the same operation.

The following characters of materials can be obtained:

DSC (Differential Scanning Calorimeter)

• Melting and crystallization
• Phase change
• Reaction temperature and heat
• Heat of combustion and specific heat capacity

TG (Thermo Gravimeter)

• Thermal stability
• Decomposition
• REDOX
• Adsorption and adsorption
• Free water and gesso content
• Ingredients proportion computation

Technical Specifications

• Temperature range: Room temperature ~1150℃ （1350℃ is optional）
• Temperature resolution: 0.1 ℃
• Temperature fluctuation: ±0.1℃
• Heating rate: 1 ~ 80 ℃ / min
• Temperature control mode: Rising temperature, Cooling temperature, Constant temperature
• Constant temperature time : 0~300min (adjustable)
• Cooling time: 15min (1000℃~100℃)
• Wide range of weighing: 1mg~2g (Can be extended to 5g)
• Resolution: 1 µg
• Constant temperature and time: 0 ~ 300min (adjustable)
• Display: 24 bit color, 7 inches touch screen display
• Atmosphere: Inertia, oxidability, reducibility, static and dynamic
• Atmosphere device: Built-in gas flow meter, including switch two-way gas and control flow volume
• Software: Intelligent software can record TG curves automatically, processing data and print experimental statements
• Data interface: standard USB connector

Standard Configuration

• QT-STA-100 Tester
• Communication cable X2
• Sample Crucible X100
• Power cord