The ZX-1 & 2 are basic fixed velocity gauges that require no special training to operate. Calibration is done by simply scrolling to a known material velocity, or selecting a common material from a list of material types in the ZX-2. The gauges were designed and built to withstand the roughest industry conditions, are affordable. If you’re looking for a quality instrument to reliably meet or exceed your application expectations, look no further.
Corrosion & Pitting
Tube & Pipe
Variety of Applications
Weight: 11 ounces (with batteries).
Size: Width (2.5 in / 63.5 mm)
Height (5.17 in / 131.3 mm)
Depth (1.24 in / 31.5 mm)
Operating Temperature: -22 to 167F (-30 to 75C).
Case: Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed).
Sealed membrane that is resistant to both water and petroleum products.
Seven or eight tactile-feedback keys.
Dual element (transmit and receive)
1 to 10 MHz frequency range.
Locking quick disconnect LEMO connectors.
4 foot cable.
Custom transducers available for special applications.
Two 1.5V alkaline, 1.2V NiCad, or 1.5V Lithium AA cells
Typically operates for 45 hours on alkaline and 23 hours on NiCad.
Low battery indicator on display. Unit turns off automatically when battery is too low to operate reliably.
Multi-function 7 segment 4.5 digit liquid crystal display with 0.500 in digit height. Two 0.125 in14 segment fields for labels and values, and one 7 segment field for labels and values. Additional icons to indicate features and modes.
Backlight is selectable on/off/auto, and selectable brightness (Lo, Med, Hi) options.
Bar graph indicates stability of reading.
Factory calibration traceable to NIST & MIL-STD-45662A.