Lighting/light receiving system | Reflection :d/8(diffuse lighting,8° direction reception), transmission :d/ 0 (diffuse lighting, vertical direction reception); SCI(including specular reflected light)/SCE (not including specular reflected light) measurement at the same time; Compliance with: CIE No.15,GB/T 3978, GB 2893,GB/T 18833,ISO7724/1,DIN5033 Teil7, JIS Z8722 Conditions C,ASTM E1164,ASTM-D1003-07 |
| | Dual-row high precision CMOS array sensor |
| |
Integrating sphere diameter | |
| |
| |
| | |
Reflectance measurement range | |
| Pulsed xenon lamps and LEDS |
| Including UV, 400nm cutoff, 420nm cutoff, 460nm cutoff |
| |
Measurement/Illumination Aperture | Reflection: XLAV Φ25.4mm/Φ30mm, LAVΦ15mm/Φ18mm, MAVΦ8mm/Φ11mm, SAVΦ3mm/Φ6mm
Users can customize the caliber, automatic identification of caliber switching Transmission: Φ17mm/Φ25mm |
Transmission measurement specification | Sample height and thickness: unlimited height, thickness ≤50mm |
| | XLAV chromaticity value: standard deviation ΔE*ab within 0.015
(Any temperature change at 20°C±10°C, measure the white calibration plate every hour within 24 hours) |
| ΔE*ab≤0.02, Spectral reflectance/transmittance≤0.1% | ΔE*ab≤0.015, Spectral reflectance/transmittance≤0.1% | ΔE*ab≤0.01, Spectral reflectance/transmittance≤0.1% |
Inter-instrument agreement | | |
| 2° Standard Observer and 10° Standard Observer |
| A, B, C, D50, D55, D65, D75, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, CWF, U30, U35, DLF, NBF, TL83, TL84, ID50, ID65, LED-B1, LED-B2, LED-B3, LED-B4, LED-B5, LED-BH1, LED-RGB1, LED-V1, LED-V2 |
| |
| Spectral data, spectral graph, chromaticity data, color difference data, color difference graph, pass/fail judgement, simulated color, color evaluation, haze liquid chromaticity, color bias |
| CIE LAB, CIE LUV, LCh, Hunter Lab, Yxy, XYZ, Musell, s-RGB, βxy |
| WI (ASTM E313-20, ASTM E313-73, CIE, ISO2470/R457, AATCC, Hunter, Taube, Berger Stensby), YI (ASTM D1925, ASTM E313-20, ASTM E313-73), Tint (ASTM E313-20), metamerism index Milm, staining fastness, color fastness, ISO brightness, R457, A density, T density, E density, M density, APHA/Hazen/Pt-Co (platinum cobalt index), Gardner (Gardner index), Saybolt (Saybolt index), Astm color, haze total transmittance, hiding power, strength, strength |
Chromatic aberration formula | ΔE*ab, ΔE*CH, ΔE*uv, ΔE*cmc, ΔE*94, ΔE*00, ΔE*ab(Hunter), 555 color classification |
| |
| 7 inch capacitive touch screen |
| |
| DC regulated power supply |
Operating temperature and humidity range | 5~40°C, relative humidity below 80% (at 35°C), no condensation |
Storage temperature and humidity range | -20~45°C, relative humidity below 80% (at 35°C), no condensation |
| Power adapter, data cable, transmission fixture, USB flash, disk, Black cavity, white board, green board, 0% calibration Visor cover (with 820N), 30mm aperture, 18mm aperture, 11 mm aperture, 6 mm aperture, support table, colorimetric dish, damping handle |
| Heating transmission fixture (including control circuit), vertical bracket, pneumatic jacking rod (including control circuit), small sample holding accessories, reflection cubed bracket corrosion resistant plate (not removable), fiber test box, film fixture, trace transmission fixture, rod box, European standard plug, American standard plug |
| |
| 1. Camera framing and positioning;
2. The instrument can measure sideways, upwards and downwards (with accessories);
3. Automatic temperature and humidity compensation function |
After the instrument is calibrated, measure the white calibration plate 30 times at intervals o 5 seconds and measure the standard deviation of the results with the XLAV caliber
At 23°C, measure the average value of XLAV diameter measured by BCRA Series 12 swatches. |
