Before a prototype tire ever touches snow courses or 600-metre ice handling tracks in northern Sweden or Finland, its cold-weather behavior gets evaluated inside a quiet lab. (After all, a winter test track is the last place anyone wants to discover a rubber compound turns brittle.)
In Hanau, Germany, Sumitomo Rubber Europe GmbH (SREU) needed dependable low-temperature rubber testing equipment for its European Center for Tire Development.
Over several months of technical back-and-forth, we worked closely with SREU's team to address every technical concern, earn their confidence, and secure an order for the QualiBrittle™ BPT-NDAH following an attractive commercial offer.
Here is how an engineering-first consultation led to SREU's order decision.
Precision Rubber Testing in Hanau
Out of their Hanau hub, SREU develops tire designs for passenger cars, light trucks, and trucks under the Dunlop and Falken names, serving both European carmaker factory-fit (OE) orders and the replacement market. Inside Hanau, a testing organization of around 20 personnel supports indoor chemical and physical evaluations of rubber and elastomer compounds as well as broader tire validation before products advance to outdoor proving grounds.
Operating within an IATF 16949 certified product design and testing framework, alongside DIN EN ISO/IEC 17025:2018 accreditation for track-based wet grip and rolling noise testing, the Hanau team requires laboratory equipment that delivers consistent, audit-ready data across compound evaluations. From where we sit, that kind of strict, no-shortcuts attitude is the exact line between dependable R&D and leaving results to chance.
A Multi-Month Technical Review
An OE-certified European R&D hub does not buy new rubber testing equipment on a whim. Over several months, SREU worked closely with our team to examine technical details before finalizing commercial terms and placing the order.
Some suppliers see extended technical vetting as a delay; we view it as a clear sign that you’re working with engineers who take their craft seriously. Rather than issuing a generic price sheet, we engaged in months of ongoing technical consultation to address every engineering question SREU raised regarding low-temperature rubber testing.
Typical technical priorities in this type of evaluation center on five areas:
- Sub-Zero Thermal Stability: Holding specified sub-zero temperature accuracy within documented tolerances across cold-weather test ranges.
- Consistent Impact Geometry: Maintaining defined striking speed and specimen clamp geometry across test runs.
- Automated Operation & Shielding: Using automated striker actuation and a safety shield to support straightforward daily operation.
- International Standards Alignment: Matching established rubber and automotive test methods.
- Disciplined Capital Investment: Securing compliant laboratory equipment without excessive capital expenditure.
Working through every technical question took patience, straight answers, and clear engineering data from our team, and we welcomed that level of scrutiny.
Meeting Requirements with the QualiBrittle™ BPT-NDAH
We think laboratory equipment should maintain defined mechanical and thermal tolerances while supporting straightforward operation. At the center of SREU's evaluation was the QualiBrittle™ BPT-NDAH, designed to evaluate the low-temperature brittleness point of vulcanized rubber and plastics when subjected to impact under specified test conditions (exact client-ordered configuration not publicly disclosed).
Sub-Zero Temperature Control
Equipped with compressor cooling from ambient temperature down to -70°C at ±1°C accuracy, and available with optional liquid nitrogen (LN2) cooling from -70°C to -120°C at ±2°C accuracy, the unit provides 0.1°C display resolution. This enables rubber laboratories to evaluate material embrittlement thresholds under controlled sub-zero conditions in-house.
Controlled Impact Mechanics
Samples immersed in a low-temperature bath within a semi-enclosed space constructed with SUS316L interior material are struck at 2.0 ± 0.2m/s with a 1.6mm ± 0.1mm striker edge radius, using Type A (6.4mm ± 0.2mm; 6.4mm ± 0.3mm; 6.35mm ± 0.25mm) or Type B (2.0mm ± 0.1mm) clamp clearances depending on specimen configuration, maintaining defined mechanical impact parameters across test runs.
Automated Control & Shielding
An HMI and PLC touchscreen interface provides automatic temperature control alongside button-controlled striker actuation and a safety shield, supporting consistent test execution.
Global Standards Alignment
The machine is specified for rubber brittleness testing under ASTM D2137, BS 903 A25, ISO 812, and JIS K 6261, as well as plastics testing under ISO 974, subject to bath medium and specimen configuration compatibility per the selected test method.
Trust Earned, Smart Value Delivered
In high-stakes car and tire R&D, a polished spec sheet on its own almost never wins a months-long review. In our view, what turns an extended technical evaluation into a successful order is earning trust by answering engineering questions directly.
By putting in the hours to clear up every technical concern raised during the evaluation, we showed we were a partner SREU could rely on before commercial negotiations finalized. Once technical concerns were addressed to SREU's satisfaction, we paired that confidence with an attractive commercial offer.
In our view, laboratories should be able to obtain standards-compliant testing equipment without excessive capital expenditure in USD or euros. After all technical concerns were addressed and an attractive commercial offer was presented, Sumitomo Rubber Europe placed the order.
Qualitest also maintains its global QualiService network to support installation, calibration, training, and maintenance where contracted.
QualiBrittle™ BPT-NDAH: Key Specifications
- Application: Low-temperature brittleness point evaluation of vulcanized rubber and plastics
- Standards: ASTM D2137, BS 903 A25, ISO 812, JIS K 6261 (rubber); ISO 974 (plastics)
- Temperature Range: Ambient to -70°C via compressor cooling (±1°C accuracy); optional LN2 cooling from -70°C to -120°C (±2°C accuracy); 0.1°C display resolution
- Impact & Clamp Geometry: 2.0 ± 0.2m/s striking speed; 1.6mm ± 0.1mm striker edge radius; Type A clamp clearance 6.4mm ± 0.2mm (6.4mm ± 0.3mm / 6.35mm ± 0.25mm) and Type B clamp clearance 2.0mm ± 0.1mm
- Control, Utilities & Footprint: HMI and PLC touchscreen with automatic temperature control; SUS316L interior construction; Three Phase 380V / 415V, 50HZ / 60HZ; 81cm × 95cm × 150cm; approx. 330 kg
Looking into low-temperature rubber testing equipment for your laboratory? Reach out to our engineering team to talk through your test standards, look over the specs, or request a custom quote for the QualiBrittle™ BPT-NDAH.