IPX1 IPX2 Drip Box Tester

Request A Quote
Parent Product

IPX1 IPX2 Drip Box Tester - Quali-IPX™ DBT

Quali-IPX™ DBT IPX1 IPX2 drip box tester verifies enclosure protection against vertically falling water drops for manufacturers, certification laboratories, and product safety engineers. Qualitest built the unit around the drip box geometry defined in IEC 60529, with a 51 by 51 nozzle array spaced on 20 mm centers across a 1,000 mm square coverage area. A motorized turntable rotates the specimen and tilts it to 15° for the IPX2 sequence. Operators set flow rate, drip height, and test duration from a single touchscreen.

Laboratories testing luminaires, switchgear, household appliances, and IT equipment need repeatable precipitation across the full specimen footprint. The Quali-IPX™ DBT delivers that uniformity through removable stainless steel nozzles fed by a filtered, pump-regulated water circuit. The filter keeps particulates out of the narrow nozzle bores, which reduces clogging and the drift in drip rate that clogging causes. Electronic height adjustment positions the tank anywhere between 500 mm and 2,200 mm above the turntable base.

A PLC controller links the turntable, lift, and pump so a full IPX1 or IPX2 run completes without operator intervention. The touchscreen runs in English, and the drip tank can be built to custom dimensions when specimen size demands it. Test parameters remain visible on screen throughout the run, so technicians can log conditions as the standard requires. Qualitest supplies the Quali-IPX™ DBT to compliance labs across North America that certify products against the IP code.

Request
Quotation

Back to Main Page