Ghana's gold buyers now work under a stricter rule. Since October 1, 2026, the Ghana Gold Board (GoldBod) treats water density as an indication only, while XRF sets final purity for doré purchases. Many shops now ask what density testing still does.
A gold purity density tester in Ghana still earns its place at the counter, the workshop bench, and the scrap table. Qualitest supplies GK-300, GKS-300, and GKS-3000 gold testers that screen karat in about 20 seconds without acid.
Where a Gold Purity Density Tester in Ghana Still Fits
GoldBod holds exclusive authority over the purchase, sale, assaying, and export of gold from artisanal and small-scale mining (ASM) under the Ghana Gold Board Act, 2025 (Act 1140). Its September 28 compliance notice makes XRF the definitive method for doré purchased by the Board and its licensed buyers.
The same notice sets a 0.7 percent purity discount when a licensed buyer cannot use XRF, or when buyer and seller both agree to water density. Therefore, density testing works as a screening step, not a payment basis.
Pricing adds another reason to screen. Since July 1, 2026, GoldBod publishes two official purchase prices each trading day, tied to the LBMA Gold Price AM and PM. Licensed buyers may not buy outside that pricing framework, so a purity error flows straight into the amount paid.
This table shows how the two methods divide the work:
| Task | Density Tester | XRF Assay |
|---|
| Final purity for doré purchases | Indication only | Definitive basis |
| Counter screening of jewelry and scrap | Fast, no acid | Higher equipment cost |
| Surface plating and complex alloys | Averages the whole piece | Reads the surface layer |
| Hidden tungsten core | May miss it | Cannot see past the surface |
Buyers who need both steps can also source XRF analyzers from Qualitest.
Who Relies on Density Screening in Ghana's Gold Chain
Ghana produced 5.94 million ounces of gold in 2025, according to the Ghana Chamber of Mines. ASM supplied 3.11 million ounces of that total, or 52.4 percent. That volume passes through several buyers who need quick checks.
Density screening serves these groups:
- Jewelry makers and retailers: In Accra and Kumasi, fabricators must meet fineness and hallmarking standards that GoldBod prescribes. A GKS-300 pre-checks castings and small pieces from 2 g before assay.
- Scrap buyers and recyclers: The GKS-3000 weighs up to 3,000 g, so buyers can sort heavy scrap lots and ingots before melting.
- Pawn and loan offices: The GK-300 gives a basic collateral check on pieces from 5 g.
- Aggregators and trade buyers: A quick density reading flags lower-purity lots before a sample goes to XRF.
The testers also average several scrap pieces weighed together, which suits mixed lots. In addition, they can detect pieces where real gold covers another metal inside.
Meanwhile, the Ghana Standards Authority hallmarking scheme states fineness in parts per thousand. A karat or purity percentage reading helps jewelers anticipate that number.
Choosing the Right Model for Your Counter
Pick a gold purity density tester in Ghana by sample size and daily inventory, not by price alone. All three models use Archimedes' principle, which compares dry weight against submerged weight to calculate density and karat.
| Model | Weighing Range | Minimum Sample | Best Fit |
|---|
| GK-300 | 0.01 g to 300 g | 5 g | Pawn shops, buying kiosks |
| GKS-300 | 0.001 g to 300 g | 2 g | Fine jewelry, multi-metal traders |
| GKS-3000 | 0.01 g to 3,000 g | 10 g | Scrap lots, ingots |
The GKS-300 adds platinum, silver, and white gold modes with a direct purity percentage, plus an airtight windshield. Also, every model works as a gram scale and densimeter, so one unit replaces two pieces of counter equipment.
Run each test the same way:
- Weigh the dry piece on the pan to set a baseline mass.
- Submerge the piece in a container of plain water and record the wet weight.
- Read density, karat, or purity percentage from the display, then repeat for each item.
Keep these limits in mind:
- Hollow, tangled, or non-metal-set pieces give less precise readings, because water cannot reach every space.
- Tungsten-cored fakes have a density close to gold and can pass a density check.
- Air bubbles and unstable water temperature skew results, so remove bubbles and hold temperature steady.
Build a Screening Setup That Respects GoldBod's Rules
Ghana's testing rules changed on October 1, and each step in the buying chain now needs matching equipment. A density tester screens karat quickly, while XRF carries the payment decision for doré. Each model measures in about 20 seconds, so a busy counter keeps moving, and Qualitest helps you size each tool to your volume.
Qualitest FZE, the GCC, Middle East, and Africa regional office in Dubai, can advise on model selection, accessories such as the airtight windshield, and pairing density testers with XRF analyzers.
Share your sample sizes and daily volume, then contact Qualitest to discuss a configuration for your Ghana operation. You can also reach the regional office directly: