Headphone Extension Life Tester machine
The Headphone Extension Life Tester is designed for rigorous headphone testing. It features a Japanese Omron 7-inch touch panel for precise program control, and Japanese Panasonic servo motors for accurate positioning and long-lasting performance. This headphone tester allows for synchronous testing of multiple sets of headsets, offering high efficiency and adjustable expansion travel. With features like clamping force measurement, cosmetic inspections, and functional tests, our machine ensures top-quality headphone performance over extended periods. Trust our Headphone Extension Life Testing Machine for thorough and reliable headphone testing.
The machine is ideal for conducting life tests on bending headsets. The procedure for the bending life test is as follows: the headsets are secured by clamps on the left and right simultaneously, and then pulled back simultaneously, with the travel adjustable. After conducting N rounds of testing, the headsets are inspected for any damage.
Test Procedure:
- Measure the clamping force of the Device Under Test (DUT). Take measurements 15 seconds after placing the unit on the measurement fixture.
- Configure the test equipment to use the following parameters for the Open, Place, Remove, and Close settings.
- Initiate the bend tester equipment. Each cycle consists of Open, Place, Remove, and Close actions. Check for cosmetic and functional issues every 500 cycles.
- After completing 7200 cycles, conduct Cosmetic Inspection and Functional Inspection on the DUT. Measure the clamping force of the DUT after the 7200 cycles.
- If the DUT passes inspection, continue running the bend tester until failure or stop at 72,000 cycles.
3D diagram of three stations
Dimensions of three stations
