Advanced Video Measuring Projector – QualiVMP™ Adv 5000 Series

Advanced Video Measuring Projector – QualiVMP™ Adv 5000 Series Applications

• 2D dimensional inspection of machined parts
  • Measure lengths, diameters, radii, angles, and positions from captured edges and constructed features for fast shop-floor or QC verification.
• Form and geometric checks for GD&T-driven parts
  • Evaluate items such as roundness, straightness, parallelism, perpendicularity, concentricity, symmetry, and flatness to support drawing-based acceptance decisions.
• Contour and profile measurement
  • Use contour illumination to trace outlines, grooves, arcs, and complex curves where contact tools are slow or risk damaging surfaces.
• High-magnification feature inspection on small geometries
  • Support inspection of fine features like small radii, narrow slots, and tight corners using zoom optics and stable lighting control.
• Optional 3D contact measurement (when configured)
  • Add a touch probe to extend capability beyond vision-only measurement for selected 3D features and height-related evaluation.
• Semi-automatic Z-axis focus and height workflows (when configured)
  • Choose autofocus configurations to improve repeatability when measuring height-related features and focus-sensitive edges.

Standards

• ISO 10360-7 – Acceptance and reverification tests for CMMs using imaging probing systems (relevant when qualifying vision-based measurement performance).
• ISO 1:2016 – Standard reference temperature of 20 °C for dimensional metrology (aligns with typical 20 ± 2 °C lab practice).
• ISO 1101 – Geometrical tolerancing (GPS) used for specifying and interpreting GD&T characteristics verified during inspection.
• ASME Y14.5 – GD&T standard widely used on North American engineering drawings that inspection systems must evaluate against.