Automatic Geotextile Cone Drop Tester (120 kg) - QualiGTX™ CDT A

Request A Quote

Automatic Geotextile Cone Drop Tester (120 kg) - QualiGTX™ CDT A

Automatic Geotextile Cone Drop Tester measures how well geotextiles and related geosynthetic products resist penetration by a steel cone falling from a fixed height. Quality-control labs, geosynthetic manufacturers, and civil engineering test houses use it to quantify installation damage risk before material goes into the ground. The test yields one repeatable number: the diameter of the hole the cone leaves. Smaller holes indicate tougher material.

The QualiGTX™ CDT A automates every step of the cone drop sequence. A color touchscreen guides setup, the clamping system secures the specimen without manual tightening, and the lifting mechanism raises and releases the cone from a repeatable 500 mm height. Operators no longer set drop height by hand or torque a clamp ring, which removes two common sources of operator-to-operator scatter.

A 45° stainless steel cone with a total mass of 1000 g, a 150 mm clear clamping ring, and a graduated measuring cone come as standard, covering the full geometry the drop cone method calls for. The 120 kg floor-standing frame holds the drop column square to the specimen plane, and its mass absorbs impact recoil that would otherwise shift the ring between drops. Repeat drops across a set of specimens run fast enough for routine production QC.

Request
Quotation

Back to Main Page